Eco-lamps KR94 User Manual

KR94
USER'S GUIDE

INSTALLATION METHOD (Adjustable width tank mounts)

Control Panel Overview 1
The KR94 control panel keys.
2
1. Five Functional Keys
+ –
or
Press to scroll through the menus and options. Or
White Light Blue Light
Moon Light
Back / Clock
Use this key to edit the time / go back.
Manual / Auto
You can quickly and easily change the light between Manual mode or Auto mode.
Set
Use this key to confirm or enter.
2. Led Display And Indications
The LED display gives you information about the light stages and time.
D1 LED
Light 1 indication

INSTALLATION METHOD (Ceiling mounts)

D2 LED
D1
Light 2 indication
D2
2
1
D3 LED
D3
Light 3 indication
D4 LED
Second indication
D5 LED
n
Percentage indication
3. General Information
Manual Mode
Manual
1 Press button to enter the manual mode. (LED shows:
Auto
2 Press button to set the time. (See 3 )
3 Press Set button to enter manual. (LED shows:
4 Press button to select
, ,
Light mode (Manual mode)
All lights off
L
Light 1, light2 & light3 can be set from 0% to 100%
Light 1 & light 2 100% (fixed)
L - 20mm = n
Light 3 100% (fixed)
setting:
Press button to enter light 1 setting, LED shows:
Set
Press button to select range 0% to 100%.
Press button to enter light 2 setting, LED shows:
3 Set
5
Press button to select range 0% to 100%.
Press button to enter light 3 setting, LED shows:
Set
Press button to select range 0% to 100%.
Press button to saved & exit.
Set
Screen shows
Auto Mode
Manual
1 Press
Auto
4
2 Press
3 Press
Set
"t1" beginning time
Press
Set
to select the "minute". Press
Intensity Setting
Make sure to unplug the power supply
Press
Set
before you connect the ballast to the light
Press
Press
Set
Press
Press
Set
Press
3 Press
Set
D4 D5
Auto Mode
1 Press
Set
press
last 2 digits blinking, press
intensity setting.
)
After intensity setting, press
)
Auto Mode
1 Press
, Set
press
last 2 digits blinking, press
intensity setting.
After intensity setting, press
220V
and "real time" alternate in 6s.
button to enter the Auto mode. (LED shows: )
button to set the time. (See 3 )
button to enter "t1" (LED shows: ) Press button to set the
Set
. The first 2 digits blinking, press to select the "hour".
6
button to go to "minute" . The last 2 digits blinking, press
button to go to intensity setting.
Set
WARNING !
button to enter light 1 setting, LED shows:
button to select range 0% to 100%.
button to enter light 2 setting, LED shows:
button to select range 0% to 100%.
button to enter light 3 setting, LED shows:
button to select range 0% to 100%.
button to saved & enter to the "t2". 5
220V
button to set the "t2" beginning time . The first 2 digits blinking,
to select the "hour". Press button to go to "minute"
Set
to select the "minute". Press button to go to
Set
button to saved & enter to the "t3".
Set
button to set the "t3" beginning time . The first 2 digits blinking,
4
to select the "hour". Press Set button to go to "minute"
to select the "minute". Press button to go to
Set 6
2 2 0
V
button to saved & enter to the "t4".
Set
WARNING !
Make sure to unplug the power supply
before you connect the ballast to the light
Auto Mode
1 Press button to set the "t4" beginning time
Set
I S O 1 4 0 0 1 : 2 0 0 8
press to select the "hour". Press
last 2 digits blinking, press
intensity setting.
After intensity setting, press
Set
Auto Mode
1 Press button to set the "t5" beginning time
Set
press to select the "hour". Press
last 2 digits blinking, press
intensity setting.
After "t5" setting, the LED shows:
Press button to set up the ending time
Set
press to select the "hour". Press
last 2 digits blinking, press
the LED will shows .
Note___________________________________________________________________
ISO 14001:2008
Error set up
EMS 554643
"t1" start at 07:00, "t2" start at 06:00, "t3" start at 09:00
In this case the "t2" will passed, you may press
Accessories

FEATURES

- PC / VHO / T5 / MH Replacement
- 5 + Years Expectant LED Life
- Heat is radiated away from water reducing or eliminating the need for chillers
- Replace metal halide with LED system that is more energy efficient
- LED light penetration allows outstanding coral growth
- Easy installation
1.1M

SAFETY INSTRUCTIONS

. The
- Make sure the power cord meets all relevant local safety standards.
- DO NOT let the power cord become damaged or frayed.
WIRE BRIDGE x2 STEEL WIRE x2
- Place the light near a wall outlet where the power cord can be easily unplugged.
- DO NOT place the light near heaters.
- DO NOT extend the wire. Doing this might affect the operation of the light.
- DO NOT expose to direct sunlight or excessive heat.
! WARNING
- Before cleaning the light, make sure you have unplugged the power
cord from the electrical socket. Doing this will prevent electrical shock.
. The
- DO NOT handle the plug with wet hands. Doing this might cause
an electrical shock.
- DO NOT pull on the middle of the power cord. Doing this may cause electrical shock.
LAMP HOLDER x4
CAUTION
!
- DO NOT attempt to service the KR94 yourself.
Doing this may render this warrantly void.
VERSION: 4.0
. The first 2 digits blinking,
button to go to "minute" . The
Set
to select the "minute". Press button to go to
Set
button to saved & enter to the "t5".
. The first 2 digits blinking,
button to go to "minute" . The
Set
to select the "minute". Press Set button to go to
(ending time).
. The first 2 digits blinking,
button to go to "minute" . The
Set
to select the "minute". Once the set up is complete,
KR94
to set right time for "t2".
1.1M
WIREWAY TUBE x2
TANK BRACKET x2