© Panduit Corp. 2011
combination head
screws (2 included)
#6 - 32 x 1.25"
combination head
screws (2 included)
#6 - 32 x 1.25"
hexagon button head
screws (2 included)
1.
Place 1/8" back seal gasket on the back
of the faceplate as shown above.
3.
Rotate module downward.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Mini-Com Water Resistant Faceplate
INSTALLATION INSTRUCTIONS
#6 - 32 x 1"
Part Number: CFPWR4**
cover gasket
base gasket
back seal
gasket
CFPWR4**
Module Installation
2.
Align notch on module with tab on faceplate.
4.
Page 1 of 2
faceplate
(cover / base)
Snap into place. Repeat for all openings.
PN282D