Table of Contents
Advertisement
Quick Links
Electronic Water Timer
Battery Installation
Install 2 AA Alkaline batteries by removing the battery holder from the back of the timer
and inserting the batteries as indicated. Replace the battery holder back.
Please change fresh batteries if the battery low indicator
appear on the LCD display.
Recycle batteries after use.
Basic Setting
1. Set Current Time
Pushing
button to decrease / increase time to the current time
Pushing or
button to confirm.
Clock is set on 12-hour time. To change to 24-hour time, press
To return to 12-hour time, press
290050
for 10 seconds.
for 10 seconds again.
2. Set Current Day
Pushing
button to move the indicator
Tuesday). Pushing or
to con rm
3. Select Water Day
There are 3 kinds of watering day setup for better selection.
A. Fixed weekday watering
Pushing
to move the ashing tear drop to the desired watering day
of the week.
Pushing
to con rm or cancel the watering day of the week.
Repeat the steps until "SA".
B. Every other 2 days watering
Pushing
to move the ashing tear drop to the position "2nd".
Pushing
to con rm. It will automatically set water day for every 2 days.
C. Every other 3 days watering
Pushing
to move the ashing tear drop to the position "3rd".
Pushing
to con rm. It will automatically set water day for every 3 days.
Note: you must at least set one watering day to move to the next step.
Pushing
or
to next step.
Programming
1. Select Water Cycle 1
A. Pushing
to move the indicator
Pushing or
to con rm to start setting up the 1st watering cycle
B. Set Start Time
Pushing
to decrease / increase time to the required watering start time.
Pushing or
to con rm to next step.
C. Set How Long
Pushing
to decrease / increase the duration (up to 240 minutes).
Pushing or
to con rm to next step.
D. Activate Eco Function: simply set up WATER and PAUSE MIN.
a. Set up WATER MIN:
Pushing
to decrease / increase the WATER duration
(the maximum interval is 19MIN).
b. Set up PAUSE MIN:
Pushing
to decrease / increase the PAUSE duration
(the maximum interval is 19MIN).
to today's day of week. (e.g. "TU" for
to "1".
.
Advertisement
Table of Contents
Related Manuals for AquaCraft 290050
Summary of Contents for AquaCraft 290050
- Page 1 2. Set Current Day 290050 Pushing button to move the indicator to today’s day of week. (e.g. “TU” for Tuesday). Pushing or to con rm Electronic Water Timer 3. Select Water Day There are 3 kinds of watering day setup for better selection.
- Page 2 The Eco Function creates a pause watering cycle, which provides absorption time Manual Watering for the soil. It can also prevent water run-o . During non-watering time, you may activate this mode to start watering. WATER MIN and PAUSE MIN can be customized according to di erent applications 1.
Need help?
Do you have a question about the 290050 and is the answer not in the manual?
Questions and answers