Page 1
TRIPOD SCREEN Projection Screen 4:3 Bedienungsanleitung User Manual Projection screen 4:3 with Stand Mobile Projektionsleinwand mit Stativ Portable projection screen with tripod stand No. 80901200 No. 80901203 www.eurolite.de...
Wenn Sie nachfolgende Hinweise beachten, sind wir sicher, dass Sie über viele Updates, Support und Jahre Freude an Ihrem Kauf haben werden. Diese Bedienungsanleitung zeigt News zur Marke. Sie Ihnen, wie Sie Ihr neues Produkt von Eurolite installieren, in Betrieb nehmen finden all das und vieles und nutzen. mehr auf unserer Website.
WICHTIGE SICHERHEITSHINWEISE WARNUNG! Lesen Sie aufmerksam die Sicherheitshinweise und benutzen Sie das Produkt nur wie in dieser Anleitung beschrieben, damit es nicht versehentlich zu Verletzungen oder Schäden kommt. • Die Stativleinwand eignet sich zur Darstellung von Filmen, Präsentationen, Fotos, etc. im privaten und gewerblichen Bereich.
BESCHREIBUNG DER TEILE Stativ Leinwand Auszugsrohr Leinwandhülse Griff Aufhängung Feststellknopf Verriegelung für Leinwandhülse Spannknopf AUFBAU 1) Nehmen Sie das Produkt vorsichtig aus der Verpackung. 2) Halten Sie das Produkt aufrecht und klappen Sie für bessere Stabilität die Stativbeine (1) leicht aus. 3) Drücken Sie den Spannknopf (5) und ziehen Sie das Auszugsrohr (2) aus bis es einrastet.
ABBAU 1) Senken Sie den oberen Teil des Stativs ab. 2) Entfernen Sie die obere Stützstange von der Spitze des Stativs und rollen Sie die Leinwand zurück in die Hülse. 3) Drücken Sie die Verriegelung herunter, ziehen Sie die Leinwandhülse aus der Stativhalterung und drehen Sie sie zurück in die Vertikale.
INTRODUCTION Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is Experience Eurolite. your connection to the world of show with an unparalleled variety of products, Product videos, suitable both for professionals and beginners. accessories, firmware and software updates,...
Please read the safety warnings carefully and only use the product as describe in this manual to avoid accidental injury or damage. • The tripod screen is designed for displaying films, presentations, photos, etc. and is suitable for private and commercial use. Thanks to the integrated carrying handle and the lightweight design, the height-adjustable tripod can be easily transported.
DESCRIPTION OF PARTS Tripod Screen Extension tube Screen housing Handle Hanging strip Locking knob Latch for screen housing Tension knob SETUP 1) Carefully unpack the product. 2) Hold the product upright and slightly open the tripod legs (1) for increased stability during installation. 3) Press the tension knob (5) and extend the extension tube (2) until it clicks into place.
DISASSEMBLY 1) Lower the upper section of the tripod. 2) Remove the top supporting rod from the top of the tripod and lower the screen until it is fully retracted into its housing. 3) Hold down the latch, pull the screen housing out of the tripod socket and put it back into a vertical position. 4) Now retract the tripod legs.
Page 12
Eurolite is a brand of Steinigke Showtechnic GmbH Andreas-Bauer-Str. 5 97297 Waldbüttelbrunn Germany D00125056 Version 1.0 Publ. 31/07/2019...
Need help?
Do you have a question about the TRIPOD SCREEN and is the answer not in the manual?
Questions and answers