Do you have a question about the Phone Line Manager 208B and is the answer not in the manual?
Questions and answers
Summary of Contents for Blackbox Phone Line Manager 208B
Page 1
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX CUSTOMER FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 SUPPORT Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 INFORMATION Web site: www.blackbox.com • E-mail: info@blackbox.com...
FCC STATEMENT FEDERAL COMMUNICATIONS COMMISSION and CANADIAN DEPARTMENT OF COMMUNICATIONS RADIO FREQUENCY INTERFERENCE STATEMENT This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against...
Page 4
referido a personal de servicio calificado. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que impidan el flujo de aire por los orificios de ventilación.
FCC STATEMENT FCC REQUIREMENTS FOR TELEPHONE-LINE EQUIPMENT The Federal Communications Commission (FCC) has established rules which permit this device to be directly connected to the telephone network with standardized jacks. This equipment should not be used on party lines or coin lines. If this device is malfunctioning, it may also be causing harm to the telephone network;...
CERTIFICATION NOTICE FOR EQUIPMENT USED IN CANADA The Canadian Department of Communications label identifies certified equipment. This certification means that the equipment meets certain telecommunications-network protective, operation, and safety requirements. The Department does not guarantee the equipment will operate to the user’s satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
1. Introduction 1.1 Introducing the Phone Line Manager 208B The Phone Line Manager 208B is a phone line management system designed to route incoming phone calls to 1 of 8 destinations (typically 2 phones, fax machine(s) and computer modems). It is also capable of transferring calls to any of the following devices: •...
1.4 Set-up The Phone Line Manager 208B is a 1 or 2 telephone line device (depending on your installation) that can be installed on any type system that consists of one or more lines, with one or more phones. The Phone Line Manager 208B has one operating mode (automatic) and can be connected at the DEMARC.
Phone Line Manager 208B to reduce tangling. NOTE Do not place the Phone Line Manager 208B in close proximity to any peripheral equipment (approximately 2 to 3 feet away from all electronic equipment). 2.2 Ports on the Phone Line Manager 208B...
Port 8). If you are not using a fax, connect a single line to either Line 1 or Line 2. If you are using two lines and are going to connect a fax to the Phone Line Manager 208B, connect the line that you want to receive fax calls on to Line 2;...
The diagram shows telephone devices connected to the Phone Line Manager 208B for the telephone system; follow the same procedures for a mini-telephone system. For the Phone Line Manager 208B to operate properly, it must be “in front” of the telephone system.
Line 1 will be automatically transferred to Port 1 and the call on Line 2 will be automatically transferred to Port 2. The Phone Line Manager 208B will ring Ports 1 and 2 a maximum of 20 times each. If either port device does not answer within 20 rings, the call will be disconnected.
Unlike a fax call, most computer calls do not produce identifying tones; they remain silent until another modem answers the call. To receive a computer call to any of the Phone Line Manager 208B ports, instruct the caller to use one of the following methods.
- In the event of an electrical power failure, the Phone Line Manager 208B has been designed to provide connections to Ports 1 and 2. With no power applied to the Phone Line Manager 208B, Line 1 is connected to Port 1 and Line 2 is connected to Port 2 thus permitting devices connected to these ports access to a telephone line.
Need help?
Do you have a question about the Phone Line Manager 208B and is the answer not in the manual?
Questions and answers