Disty distybox300 Faq

FAQs
The most common questions – answered at a glance

1. Telekom Speedport Smart 3

Problem: Device cannot be logged in. The router should have the firmware
update (status 9/2019): 010137.3.5.000.1 or newer!
2. Change distybox
Normally, it is absolutely sufficient if you use
the DECT base station. No further parameters need to be changed, it does
not matter whether you use VOIP phone or fax, book in and you're done.
There are only a few exceptions that require parameter changes.
3. Can the distybox
The type of mains connection is not relevant for the operation of
It works on all networks.

4. No analog phone at hand?

You no longer have an analogue telephone to set parameters of
No problem: You can set all the dialing procedures via the the keyboard of your
multifunction device.
settings
300
distybox
also be operadet with a VOIP port?
300
5. Fax is not transmitted or not
transmitted completely!
Everything is set up correctly, but incoming or
outgoing faxes are not or only incompletely
transmitted?
Please reduce the transmission speed of your
fax machine (baud rate) as much as possible.
distybox
in your router or
300
distybox
distybox
www.disty.de
300
English
300 .
?
300
09/2019