Advertisement
Screw A: 1/4 - 20 UNC × 10, 2 pcs
Used to attach the box camera to camera base plate.
Screw B: 1/4 – 20 UNC × 14, 2 pcs
Used to attach the TVC-OH2-H to the wall mount bracket
(TVC-M2-WM).
Dimensions of TVC-M2-WM:
297.3 × 88 × 122.9 mm (11.7 × 3.5 × 4.8 in.)
Weight of TVC-M2-WM:
2 / 4
473 g (1.04 lbs.)
Supported cameras
The housing can be used with the following box
cameras:
TVI/Analog Box
TVC-4401, TVC-2401
Camera
IP Box Camera
TVC-1201, TVC-3201, TVC-1202, TVC-
3202,
TVC-5401, TVC-5402, TVC-5403
Installation
The housing is shipped with a TVC-M2-WM box
camera wall mount.
To attach a box camera to the box camera
outdoor housing (TVC-OH2-H):
Note: Prior to installing the TVC-OH2-H housing, run
the interconnect cables and mount the wall bracket
(TVC-M2-WM). Refer to the TVC-M2-WM Wall
Mount Installation Instructions.
1.
Loosen the two latches located on the side of
the TVC-OH2-H to release the housing cover.
Lift the housing cover open.
2.
Loosen the four camera base plate screws and
remove the base plate from the camera
housing. Attach the box camera to the base
plate, using the two A screws.
P/N 1073110-EN • REV C • ISS 02FEB17
Advertisement
