Summary of Contents for Stansport 586
- Page 1 Sluice Stand Instructions Item# 581 Item# 586 2801 East 12th Street | Los Angeles, CA 90023 phone 323.269.0510 | fax 323.269.2761...
- Page 2 6. The holes at the base of the legs are intended to secure the frame to plywood for extended use. 7. Insert your 24” or 30” sluice box in the center of the frame. 8. Pick up the carpet slightly and slide sluice the under tabs. This holds the sluice box from sliding off the end. 9. Lift up the snap clips until they snap securely onto the top of the sluice box. Set Up Operating Sluice Instructions 1. From new: Remove frame from box, noting this 1. Refer to the Operating Instructions provided is in its original folded position. with your sluice box 2. Grasp frame in center with one hand. Holding Storage the frame parallel to the ground, quickly release the bottom half of the frame so it swings downward and 1. U nlatch the frame by grasping both clips with the spring clips are engaged into their locking holes. your thumbs at the same time and pull outward. The frame should be locked rigid at this point. If not, apply light pressure to the spring clips to engage 2. Ensure the frame is in its original folded position. them into the locking holes.
Need help?
Do you have a question about the 586 and is the answer not in the manual?
Questions and answers