Page 1
OPERATING INSTRUCTIONS DSL 030 EVOLUTION THERMOSTAT K 60 D 040 Z November 2000 10 11 356 - GB - 01...
Page 2
1 - PRESENTATION Ambient temperature (or temperature setpoint) Mode selected (blinking if active) ON/OFF Extended absence (antifreeze) / Occupied / Eco (unoccupied) Fan control Mode (ON/OFF) or setpoint type (HEAT/COOL) Fan speed Parameter modification 2 - START-UP • Press the 0/1 key to turn the system on. The "ON" message is displayed. •...
3 - SHUT DOWN • Press the 0/1 key. The "OFF" message is displayed. 4 - DISPLAY FUNCTIONS 4.1 - OPERATING MODE : Heating mode: blinks if the thermostat detects a heating request. : Cooling mode: blinks if the thermostat detects a cooling request. If no heating or cooling request is detected, the two symbols remain lit.
Page 4
Due to our policy of continuous development, our products are liable to modification without notice. R.D. 28 Reyrieux BP 131 01601 Trévoux CEDEX France Tel. 33 4 74 00 92 92 - Fax 33 4 74 00 42 00 R.C.S. Bourg-en-Bresse B 759 200 728...
Need help?
Do you have a question about the DSL 030 and is the answer not in the manual?
Questions and answers