Rite Mounts PFM Series Installation Instructions

b) Mounting to solid wall
Use solid wall anchor* along with the wood screws (Part-X1). First drill a hole for solid wall
anchor, put it in, attach the Part-A (wall plate), and screw Part-X1(wood screw) into the solid
wall anchor.
*solid wall anchor is sold separately, or available in local hardware stores.
Warning: Make sure the wall can support the combined weight of mount and the TV.
Step3: Hang the TV with the interface arm installed (Part-B) onto
the wall plate (Part-A)
Hook the TV with arms (Part-B) installed onto the top of the wall pate (Part-A), then slowly
swing screen inward. Then please slide in the anti-theft bar (Part-C).
Optional: A padlock can be used to lock Part-A and Part-C together, if anti-theft is necessary
Page 4 of 4

Installation Instructions

PFM-Series Flush TV Wall Mount
DISCLAIMER
This document is intended to be made accurate and complete. However, there is no
guarantee the information contained herein covers every aspects. The manufacturer
and the distributor make no representation of any warranty regarding the information
contained, and assume no corresponding responsibility.
WARNING:
•
Prior to installation, please read and understand this instruction manual. If you have
any questions or uncertainties, please consult your seller or local professionals.
•
If the wall structure could not support the combined weight of mount and the TV,
please reinforce the wall prior to the installation. Installation on drywall may be
dangerous.
•
For installation on wood stud, please make sure the wood screws are in the center of
the wood stud, using an "edge to edge" stud finder is recommended.
•
To avoid damage a flat panel television set should never be laid flat. It must remain
in an upright position.
•
Tighten the screws firmly, but never overtighten.
Features:
•
Designed for 37" to 63" flat screen TVs.
•
Ultra slim design holds the screen only 15/16" from the wall.
•
A padlock can be added for security.
•
Holds TV up to 170 LBs.

Required tools:

Stud finder; Screwdriver; Level; Drill

Parts list:

www.RiteMounts.com
Page 1 of 4