Related Manuals for Dreammaker Spas Crossover Series
Summary of Contents for Dreammaker Spas Crossover Series
- Page 1 Support tube Connect tube Support tube Long leg Long leg #10 Philip pan head self drilling screws 12 Pieces Left base bracket Right base bracket 4- #10 Philip pan head screws Use 1-1/2 inch for Crossover models or use 1 inch on all other models.
-
Page 2: Installation Instructions
INSTALLATION INSTRUCTIONS. Tools needed: power drill, #2 Philips screw driver bit (6 inches or longer preferred), and measuring tool. For your lifter to operate, the spa must be a minimum of 19 inches (49cm) from the nearest wall and allow at least 71 inches (180cm) above (Fig 5).
Need help?
Do you have a question about the Crossover Series and is the answer not in the manual?
Questions and answers