Transducers 1. Introduction 1.1 Product Overview The following User’s Guide is for use with Blue Ribbon Birdcage BC001 along with models 313L, 313S,1103 and any of the other submersible transmitters available. 1.2 Using this Guide This manual is intended to help the end user install, maintain, and provide general service of all Blue Ribbon Submersible Level Transducers.
Pressure, Level & Temperature Transmitters & Transducers A 4-20mA transmitter requires a DC power supply (typically 9-32 VDC) and mA meter wired in a current loop. Connect the red wire of the transducer to the + terminal of the power supply and the black wire of the transducer to the + input terminal of the meter.
3.3 S ubmersion Blue Ribbon submersible transmitters come standard with Hytrel jacketed cable to minimize the risk of damage from cuts or abrasions. Use care when lowering the transmitter into the well making sure the cable does not drag over sharp edges. Avoid dropping the transmitter from the surface.
Model number Repairs should only be done by Blue Ribbon Corp. Repairs done by customer will void any warranties and may cause permanent damage to unit. Repairs done by customer on Intrinsically Safe units will void the approvals and are a potential explosion hazard.
Blue Ribbon Corp warranties its products to the original customer/purchaser against defects in material and workmanship for a period of one (1) year from the date of delivery by Blue Ribbon Corp, as shown in its shipping documents, subject to the following terms and conditions:...
Need help?
Do you have a question about the Birdcage BC001 and is the answer not in the manual?
Questions and answers