Advertisement
INSTALLATION INSTRUCTIONS
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
Observe all local plumbing and building codes.
‰
The appearance of the pump assembly may differ from the illustrations. The installation instructions still
‰
apply.
For installation on a thin deck, slide the washer (provided) onto the shank before tightening the nut onto the
‰
shank.
Kallista reserves the right to make revisions in the design of faucets without notice, as specified in the Price
‰
Book.
1.
Slide gasket onto underside of escutcheon.
3.
Insert pump assembly through
hole.
1104266_2_B
2 of 3
ThANk YOU FOR ChOOSINg kALLISTA
BeFORe YOU BegIN
INSTALLATION
O-ring
Soap/Lotion Dispenser
2.
Insert blunt end of tube into pump assembly.
Tube
4.
Tighten nut onto shank.
Questions? Problems? For additional assistance, please contact Kallista's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Washer
(for thin deck
Nut
installations)
Advertisement
