Subscribe to Our Youtube Channel
Summary of Contents for Nailor 92LFDF-SS
- Page 1 NstALLAtION perAtION & AINteNANce Laminar Flow Ceiling Diffuser with Filter Models: 92LFDF-SS & 92LFDFS-AL Read completely and save these instructions for future reference.
- Page 2 1. Surface Mount Installation 2. Lay-in Ceiling Installation 3. Removal and Replacement of the Gel Seal Hepa Filter Page 2 of 6 10/19 IOM-92LFDFINST Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
- Page 3 Nailor Industries of Texas Inc. 4714 Winfield Road Houston, Texas 77039 U.S.A. Tel: (281) 590-1172 Fax: (281) 590-3086 info@nailor.com www.nailor.com 10/19 IOM-92LFDFINST Page 3 of 6 Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
- Page 4 Step 11 Raise the face frame back into place, re-attach the safety chains, and secure quarter-turn fasteners. Page 4 of 6 10/19 IOM-92LFDFINST Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
- Page 5 Step 7 Raise the face frame back into place, re-attach the safety chains, and secure quarter-turn fasteners. 10/19 IOM-92LFDFINST Page 5 of 6 Nailor Industries Inc. reserves the right to change any information concerning product or specification without notice or obligation.
- Page 6 If the unit is equipped with the HEPA-lert battery powered LED system, replace the battery at this time. Step 6 Unpack the new filter and inspect for shipping damage. If damage is found, do not install in unit; call Nailor for replacement arrangements.
Need help?
Do you have a question about the 92LFDF-SS and is the answer not in the manual?
Questions and answers