Troubleshooting - Hamilton Beach 34102 Manual

840210600 ENv03.qxd:Layout 1

Troubleshooting

PROBLEM PROBABLE CAUSE
Cooktop does not
• LOCK has been set. Make sure cooktop is unlocked.
work after being
• Buttons are being pressed too hard—they only need to be touched to operate.
turned on.
• Cooktop not plugged in. Plug cooktop into wall outlet. Repeat start process in "Using the Cooktop"
• Cookware not in center of cooking zone.
Control panel does • LOCK has been set. Make sure cooktop is unlocked.
not work when
buttons are pressed.
Cooktop keeps • Cookware not induction-compatible. Make sure to use compatible cookware. See "Selecting the Right
beeping.
Error code E0, E4, • Cooktop is defective. Do not attempt to repair. Contact Customer Service at 800-851-8900.
E5, E7, or E8 when
cooktop display
flashes an Error
Code.
Error code E1 when
• Blocked airflow. Cooktop must be at least 1-inch (2.5 cm) away from wall or other obstructions.
cooktop display
flashes an Error
Code.
• There may be too many appliances in the same outlet. Plug into wall outlet with no other appliances.
Error code E2 or E3
when cooktop
display flashes an
Error Code.
Error code E6 when • Cookware heated too long. Remove cookware to cool. Repeat start process in "Using the Cooktop"
cooktop is turned off.
10
12/19/11 9:19 AM Page 10
section on page 6.
Cookware" section on page 5.
section on page 6.