Summary of Contents for IPC Gansow TITAN 151BF 87
- Page 1 Translation of the original operating instructions Machine models TITAN 151 BF 87 TITAN 351 BF 140 IP Gansow GmbH Dreherstraße 9 D 59425 Unna www.gansow.de...
-
Page 2: Important Warnings
Important warnings Important warning: Do not use this appliance without first reading the operating instructions. Important warning: This appliance is not suitable for removing dusts hazardous to health. Important warning: This appliance is to be used for the wet cleaning of non-textile floors only. Important warning: This appliance is not authorised for use outdoors, on public footpaths or on highways. - Page 3 1.17 Important! Rooms where batteries are being charged should always be well ventilated. 1.18 Instruction 1.16 does not apply to gel batteries. 1.19 The suitable temperature for the use of the machine ranges between +4°C and +35°C; when the machine is not used, the temperature range is between +0°C e +50°C.
- Page 4 Commissioning and operating the machine The plug at the end of the charger lead (connecting the charger to the battery) should only be removed from the battery socket after the charger has gone off automatically. The plug connected to the machine should then be inserted into the battery socket.
- Page 5 Instructions for use during cleaning After switching on the machine, the operator must wait about 3 seconds before all functions are verified and ready for use. IMPORTANT: Before turning or driving around corners the speed should be reduced considerably. To do this the operator simply exerts less pressure on the accelerator.
-
Page 6: Troubleshooting
Troubleshooting No water is delivered. - Check the water pump fuse. - Turn the delivery knob clockwise. - Clean the filter in the water tank. - Fill the clean water tank. - Check feed pipes for kinks. - Lock the plug at the red emergency lever - Check operation of the pump. -
Page 7: Service And Maintenance
If not used for long periods, leave the machine with the battery charged and the battery plug unplugged. A general control by authorised IPC GANSOW personnel is recommended at least once every six months. 6.10 Faulty or unused batteries should be disposed of correctly. -
Page 8: Technical Data
Extra Rotating flash light Technical data Machine model Titan 151 BF 87 Titan 351 BF 140 Drive motor 36 V 0,600 kW 1,4 kW Vacuum motor 36 V 1 x 0,670 kW 2 x 0,658 kW Brush motor 36 V 2 x 0,650 kW 3 x 0,650 kW Air circulation... - Page 9 Inspection and maintenance list weekly monthly ¼ yearly ½ yearly yearly 1. General: Check brush head Check position and condition of brushes Check the brush head is horizontal and flat when in the operating position Check clean water tank and dirty water tank for leaks Check that switches are working and lights are not blown.
- Page 10 8. Brakes Check position and effect of brake pedal and that there are no leaks (valid only for Titan 351 BF 140) Check rear brake linings Check position and effect of parking brake 9. General inspections Have the machine checked by an electrician Have the machine serviced IP Gansow GmbH Dreherstraße 9...
Need help?
Do you have a question about the TITAN 151BF 87 and is the answer not in the manual?
Questions and answers