Part Ix Frequently Asked Questions - TeleType GPS Mini-Bluetooth GPS Receiver User Manual

11 TeleType GPS Mini-Bluetooth GPS Receiver
Verifying Your Connection:
Once you have completed the setup of your Bluetooth device, you may check to see if your TeleType
GPS software is attempting to fix your position. You can do this by opening your GPS software, and
selecting Tools -> GPS Status. Go to the Status tab, and click on Find GPS Port. Shortly, you will
see the GPS code running as in the picture above. This signifies that your Bluetooth device is
functioning properly.
9 Frequently Asked Questions
Q: My Bluetooth host device is asking me for a passkey. What is it?
A: It is "6268".
Q: The TeleType software doesn't seem to be making any connections with my Bluetooth GPS
receiver. How do I make it work?
A: You will need to make sure your PDA is paired with the Bluetooth device. Follow the instructions in
the Connection section to make sure that your PDA is recognizing the Bluetooth GPS receiver
properly. If so, you will need to connect with the device by going to the Bluetooth Manager and double-
tapping on the TeleType icon.
Q: My Bluetooth receiver seems to be connecting to satellites, but I am unable to establish a
connection between the receiver and my PDA. How can I make a connection?
A: Go to the Bluetooth Manager on your PDA. Locate the "TeleType: SPP Slave" icon and tap and
hold. A pop-up menu will appear, select Delete.
Next, locate the Reset button on your Bluetooth GPS receiver and press it. Then perform a soft reset
on your PDA.
Once your PDA has finished resetting itself, go back to the Bluetooth Manager screen and perform the
© 2004 TeleType GPS