Advertisement

Quick Links

0+ I
0 -18kg
0 - 4 years

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pago and is the answer not in the manual?

Questions and answers

Summary of Contents for Koopers Pago

  • Page 1 0+ I 0 -18kg 0 - 4 years...
  • Page 2: Table Of Contents

    Safety warning Contents For your child’s safety,please read these instructions carefully before use and keep them for future reference.Failure to follow the instructions contained in this manual could result in Parts and interior equipment ..............3 serious injury to your child. Usage 1.This child seat can only be used with the harness for children less than 18 kg in weight 2.1 Install position of the child seat in vehicle...
  • Page 3: Parts And Interior Equipment

    2. Usage 1. Parts and interior equipment 2.1 Install position of the child seat in vehicle This child seat is suitable for conventional use in all cars equipped with 3 point seat Headrest belts that are fitted in accordance with Backrest Euroapean standard(ECE 44 or equivalent standard)
  • Page 4: Usage Of Buckle

    2.3 Usage of buckle 2.5 Adjust the child seat to different incline positions 1 2 3 4 CLICK Firstly,adjust the shoulder straps height,please proceed as follows: Before adjusting After adjusting Step1.Put the two metal sections of the buckle connector together. The child seat can be adjusted to 4 different positions.If installed rearward-facing Step2.Slot the two buckle connectors into the slot in the buckle until they (group 0+),only the position 4 can be used.Pull the positioning handle under...
  • Page 5: Remove The Crotch Pad And Buckle

    Step 3.Then re-thread the shoulder straps and chest straps into the appropriate strap slots from the front of the child seat and slide them onto the harness connectors. Important: Make sure that both of the shoulder belts and Step 2:Pull out the diagonal belt together chest belt go through slots at the same height,and not with lap belt, through the belt route slot twisted.
  • Page 6: Maintenance And Cleaning

    Installing the safety group I This child seat can be used with the harness for children 9 kg to 18 kg in weight Step 5:Put the child into the seat and fasten (group I),installed forward-facing using a three-point lap and diagonal seat belt. the harness.

Table of Contents