Delta Core TYBOX 237 Manual

TYBOX 217 - 227 - 237 - 327 - 337
www.deltadore.com
Important product
information (❷❹)
Time setting
31
2
1
3
Turn the selector dial to
1
The days flash.
Press + or - to select the day, then press OK
to confirm and move on to the next setting.
This mode protects your home from frost if you are absent for several days.
Turn the selector dial
Enter the return date
31
1
Confirm
To change the mode in progress, press OK again.
To cancel the current absence mode, turn the selector dial.
Press time /
> 3s
Program «Once» /
PROG
Weekly programming /
PROG
x7
2 daily programs (week + week-end) /
PROG
5+2
i
Information button
In AUTO mode, pressing the i button displays the room temperature or the temperature setting,
depending on the configuration during installation.
Set-point temperature Room temperature
12
2012 ...
4
1
6
5 7
.
and enter the return date.
The Frost Protection
setting is adjustable
(§ «Setting
temperatures»).
15°C
5°C
Confirm
The Frost Protection
setting is adjustable
AUTO
P1 P2 P3
20°C
18°C
16°C
0.00 6.00 8.00 11.00 13.00
Turn the selector dial to AUTO.
Your thermostat follows the programme.
Depending on the configuration during installation,
your device will constantly display the temperature
setting or the room temperature. To change these
settings, refer to the»installation guide» or contact
your installation engineer.
TYBOX 3x7
23 59
8
10
0 0
9
11
Repeat the process to set
the hours and minutes.
Countdown
Return to AUTO
18/02/2012
mode at the end of
00.00
the countdown, at
00:00.
PROG
P4 P5 P6
20°C 20°C
18°C
16°C 16°C
23.00 0.00
17.00
TYBOX follows the program «Once».
Operating hours counter (boiler)
4
0 2 3
h (ON)
5
Interval before maintenance
of the boiler
EXIT
This mode is used to switch your heating
installation off. Turn the selector dial to
In this mode, the device displays the room
temperature.
P1 P6
20°C
16°C
6.00 23.00
Return to
automatic mode
STOP
.