Do not use to pump chemicals, fuels, salt water or inflammable, corrosive, explosive or dangerous liquids. If the product is damaged or has any defects, please contact cservice@oypla.com USER MANUAL Model No: 3226...
The floater is adjusted in a way that the pump can immediately be started. NOTE: The pump shaft should have minimum dimensions of 40x40x50cm, so that the floating switch can move freely. USER MANUAL Model No: 3226...
Page 4
Check if electrical connection is 230V~, 50Hz. Check if socket is in good condition. Make sure that the water and humidity can never come to the mains supply. Avoid pump running fry. USER MANUAL Model No: 3226...
Proper operation is not guaranteed if the gap is too small. When you set the float switch, make sure that it does not touch the base before the pump switches off. CAUTION: Risk of dry-running. USER MANUAL Model No: 3226...
Page 6
Please retain a copy of all instructions for future consultation. Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX USER MANUAL Model No: 3226 USER MANUAL Model No:...
Need help?
Do you have a question about the 3226 and is the answer not in the manual?
Questions and answers