Table of Contents
Summary of Contents for Green Bit DactyScan84c
- Page 1 DactyScan84c DactyScan DactyScan84 DactyScan DactyScan 84c c c c Operator’s Manual Produced by: Green Bit S.p.A. Via Rivalta 9 10095 Grugliasco (TO) Tel: +39 011 7703811 Fax: +39 011 7703880 info@greenbit.com Rev. 1.0 July 2012...
-
Page 2: Table Of Contents
Rolled finger acquisition _________________________________________ 10 Installation _______________________________________ 11 PC Requirements _____________________________________________ 11 Packaging___________________________________________________ 11 External appearance __________________________________________ 12 Use _____________________________________________ 13 Maintenance ______________________________________ 14 Cleaning of the casing _________________________________________ 14 Cleaning of the scanner ________________________________________ 14 DactyScan84c Rev. 1.0 July 2012 Operator’s Manual... -
Page 3: Introduction
Green Bit reserves the right to modify, integrate or improve the manual without implying that this publication is inadequate. Operators who use the device must have access to the manual and know its contents. -
Page 4: Safety Regulations
The DACTYSCAN84C device is designed for indoor use and must be protected against water and other liquids. Green Bit shall not be held responsible for any damage caused by improper use of the DACTYSCAN84C device. DactyScan84c Rev. 1.0 July 2012... -
Page 5: Electromagnetic Emissions
For further information regarding collection and recycling points in your area, contact the authorities of your city or the Green Bit customer assistance service or your retailer for information on withdrawal of the device. -
Page 6: Compliance With Directives And Regulations
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. DactyScan84c Rev. 1.0 July 2012 Operator’s Manual... -
Page 7: Warranty
Warranty Warranty Green Bit S.p.A. warrants the devices for a period of 12 (twelve) months from the date of delivery. Such warranty covers only free supply of parts that, after checking at our offices, are found to be faulty. The warranty, with exclusion of any liability for direct or indirect damages, is... -
Page 8: Description And Characteristics
Description and Characteristics Description and Characteristics 4.1 Description of the product The DACTYSCAN84C device is a portable appliance consisting of one optical live fingerprint scanner without any mechanical movements: To operate, the DACTYSCAN84C must be connected to a Personal Computer (application station) via a USB 2.0 interface. -
Page 9: Technical Characteristics
Description and Characteristics 4.3 Technical characteristics 4.3.1 Power supply The DACTYSCAN84C device is powered throught the USB 2.0 interface 4.3.2 Operating and storage conditions Parameter Description Min. Max. Storage temperature (ºC) Operating temperature (ºC) Relative humidity (without condensation) 4.3.3 Physical characteristics... -
Page 10: Four Slaps And Two Thumbs Acquisition
Max. speed rolled 10 mm/s fingerprint Max. time for rotation (time out from start of Automatic stop at end of acquisition acquisition) Display Real time Contrast and brightness Automatic adjustment Elimination of latent Automatic print DactyScan84c Rev. 1.0 July 2012 Operator’s Manual... -
Page 11: Installation
Installation Installation This chapter explains how to install the Green Bit DACTYSCAN84C device. NOTE Before connecting the DACTYSCAN84C device to the Personal Computer, the software driver must be installed. Consult the MultiScan SDK software manual. 5.1 PC Requirements Prior to installation, check that the Personal Computer is suitable for the device. -
Page 12: External Appearance
Installation WARNING Use of accessory components other than those furnished by Green Bit does not guarantee compliance with current Directives and legislation 5.3 External appearance The device is housed in an ergonomically-designed case with, on the surface, one optical, as shown in the photos: A) Optical scanner (3.2”... -
Page 13: Use
After installation, the DACTYSCAN84C device is ready for use. NOTE Image acquisition and quality control is carried out and checked by specific application software; for further information, refer to the MultiScan SDK software documentation and the user manual of the application for installation and use. -
Page 14: Maintenance
Maintenance Maintenance The DACTYSCAN84C device does not require any particular maintenance. However, particular attention must be dedicated to cleaning the unit and surface scanners. WARNING Cleaning must be carried out with the device OFF and disconnected from the Personal Computer. - Page 15 Green Bit S.p.A. Via Rivalta 9 10095 Grugliasco (TO) Tel: +39 011 7703811 Fax: +39 011 7703880 info@greenbit.com...
Need help?
Do you have a question about the DactyScan84c and is the answer not in the manual?
Questions and answers