DESCRIPTION OF THE DEVICE
INSTALLATION
Rigging
The device can be installed on the ground or in a trussing.
Install the device out of the public area.
Only install the machine on scratch resistant surfaces. The device must only be installed absolutely planar at
a vibration-free, oscillation-free and fire-resistant location.
The operational surroundings must be free from solid or liquid easy-to-move objects, which could be tilted,
absorbed or accelerated by the air flow.
Overhead rigging
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device may be placed on the floor by unfolding the brackets or fastened to a truss or similar rigging
structure. The device must never be fixed swinging freely in the room.
1
The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2
Block access below the work area and work from a stable platform when installing the device.
3
Use rigging hardware that is compatible with the structure and capable of bearing the weight of the
device. Please refer to the "Accessories" section for a list of suitable rigging hardware.
(1) Housing
(2) Power supply via P-Con socket
(3) DMX out
(4) DMX in
(5) Fixation screw
(6) Stand- and mounting bracket
(7) Safety eyelet
(8) Rotary knob for speed
15/20
00112245, Version 1.1