Page 1
MODEL 596SGFI DUAL CURRENT SENSING GROUND FAULT INDICATOR MODULE The Model 596SGFI is a dual channel current sensing ground fault detector module. In conjunction with any IED Monitor/Test System, it can be used to monitor the current in any speaker circuit, as well as to detect a fault to ground in either side of an amplifier such as the IED Models 6270L/H or 6208L/H.
Page 2
Normal current sensing is available with or without the power supply Power Amplifier Figure 1 - Connecting the 596SGFI to the 8000 Series Innovative Electronic Designs, Inc. 9701 Taylorsville Road Louisville, Kentucky 40299 USA Phone: (502) 267-7436 Fax: (502) 267-9070 Internet: http://www.iedaudio.com SECTION...
Page 3
INSTALLATION INSTRUCTIONS MODEL 596SGFI DUAL CURRENT SENSING GROUND FAULT INDICATOR MODULE A portion of the rear panel of the 596M Mainframe LEDs indicate the occurrence of a ground fault Plug into adjacent 596SGFI +5 VDC POWER SUPPLY Power supply is needed for...
Page 4
MODEL 596SGFI DUAL CURRENT SENSING GROUND FAULT INDICATOR MODULE INSTALLATION INSTRUCTIONS Figure 3 - 3 596SGFIs mounted in Snaptrackä and interconnected to share a power supply Innovative Electronic Designs, Inc. 9701 Taylorsville Road Louisville, Kentucky 40299 USA Phone: (502) 267-7436 Fax: (502) 267-9070 Internet: http://www.iedaudio.com...