Sycamore SY8979 Installation Instructions

Installation instructions : Multi-function Lithium Battery Dual Purpose Sensor Light SY8979
Thank you for purchasing this SycamoreLED.com product. Please make sure instructions are followed carefully prior to and during installation and
product is not altered, otherwise warranty may not be valid. For technical support or warranty information please visit www.sycamoreLED.com, or call
our dedicated technical helpline +44 (0) 113 2866686.
1)
Please read these instructions carefully before commencing any work
2)
It is strongly recommended that this unit is installed by a qualified electrician
3) This product is suitable for dry places
4) Please ensure that the infrared sensor is uncovered
5) Please use dry, clean and soft cloth to maintain the product
Factory default setting is OFF mode; Three control switches of operating states: A, M
and OFF. "A" - Auto mode: open door to illuminate light - close door for light to turnoff
"M" - Swipe mode: Swipe to turn light on and swipe to turn off - "O" - To turn off light
N.B. This fitting can either be used as either a door or swipe on/off sensor
SycamoreLED.com
LS26 8XT
Technical helpline : 0113 2866686
*Please email sales@sycamoreled.com to register your product
IMPORTANT—Please read prior to installation

ACCESSORIES

Cabinet door lighting SY8979
USB charging cable

FUNCTIONALITY

A: Auto Mode
O: Light off
M: Swipe (Manual) Mode
Magnetic Pads
ROHS
Swipe
Auto