Sunleaves Sunspot 6 Plug N’ Play Instructions

About your Sunleaves Sunspot 6 or Sunspot 8 Plug N' Play Reflector:
• High-quality, heavy-duty housing with durable enamel-coated finish.
• Innovative hinged lens provides an airtight seal and easy lamp access.
• Plug N' Play unit is pre-wired with fixed socket and cord.
• Socket mounting bracket designed to maximize airflow.
• Specular interior made with German Alanod aluminum for superior reflectivity.
• Compatible with ballasts featuring the common outlet. (Refer to picture below.)
common cordset outlet
Instructions:
1. Make sure lens frame is secured to hood with thumb screws.
2. Attach provided hangers to reflector housing. Be sure hangers are secure then hang reflector
with a chain or strong cord. Reflector should hang level.
3. Loosen the thumb screws while holding the lens frame. Gently let lens swing open. Complete
lens removal is recommended but not necessary.
4. Install lamp and wipe clean with a soft dry cloth. (Make sure lamp type and wattage are
compatible with ballast.)
5. Swing lens closed and securely tighten thumb screws.
6. Plug cord firmly into common outlet on ballast. Now you're ready to grow!
Make sure light sy­­stem is unplugged and completely­­ cool before proceeding.
Sunleaves Sunspot 6 & Sunspot 8
Plug N' Play­­ Instructions
Thank you for choosing to grow with Sunleaves products!
Your satisfaction and success are important to us. For best
results, carefully read the following instructions before
using your Sunleaves Sunspot Plug N' Play Reflector.
Time to clean y­­our lamp or lens?
SSRI rev 10/08