Q&Q D056-500Y Instruction

1. Alarm Indicator
2. Alarm set button
3. Time set buton
4. Minute set button
5. snooze button
6. Hour set button
7. Alarm ON/OFF switch
8. Alarm HI/LOW switch
To Operate Clock
Blinking display/PM Indicator/ Alarm On Indicator
When the clock is plugged in, the display will blink on and off meaning the
incorrect time is being displayed. You should always check the time when
this is indicated. When the alarm indicator is on, the alarm will sound at
the time set.
Set Time
Press the Time button and the Hour button until the correct hour is
displayed, then release the Hour and press the Minute button until the
correct minute is displayed.
Set Alarm
Press and hold the Alarm button and the Hour or Minute button as above.
To Operate Alarm
Slide the Alarm ON/OFF switch to ON position. The alarm will sound at he
time set. To shut off the alarm, slide the Alarm ON/OFF switch to OFF
position. Slide the Alarm HI/LOW switch to HI for loud alarm or LOW for
normal alarm.
Snooze
Press case top to activate snooze and get extra 8-9minutes of sleep.
Battery Back up
Insert one 9V battery into the battery compartment on the back-side of
the clock. The battery will hold the ALARM and the Time settings until
power is restored. If there is no battery and the power is interrupted, the
display will flash and the ALARM and the TIME will need to be reset.
D056-500Y
Instruction for LED Alarm Clock