Stalgast 620011 Instruction Manual

1.

CHARACTERISTICS OF THE DEVICE

• Broad scope of measurement
•
Rotating probe
• Low battery use
• Stainless steel probe
• Pocket size
• Max/min temperature memory
• Hold reading function
• Possibility to display measurement in two different scales: Celsius and Fahrenheit
2.

TECHNICAL SPECIFICATION

Range of measurement
Accuracy of the display
Minimum read on the display
Alarm setting accuracy
Update frequency of the temperature reading
Temperature unit
Automatic disabling of the device
The display size
Battery
Battery Life
The probe dimensions
Dimensions of the device
Working temperature
3.

INSTALLATION

1. Open the battery container
2. Install battery, mind the polarity (+/-)
3. Close the battery container lid.
4.

OPERATING THE DEVICE

4.1.

MEASUREMENT

1. Pull the probe and turn it clockwise to set it at the desired angle
2. Place the probe in the product intended for measurement, insert it to a depth of 25mm (1") and read the temperature.
4.2.

UNIT OF TEMPERATURE MEASUREMENT

Press and hold the [°C/°F] button for about 3 seconds, then release the button and choose the unit of measurement
tel.: 022 517 15 75 fax: 022 517 15 77 www.stalgast.com email: stalgast@stalgast.com
INSTRUCTION MANUAL
Thermometer
MODEL: 620011
Stalgast sp. z o.o. ul. Staniewicka 5 03-310 Warszawa
-50 ~ 300 ° C/- 58 ~ 572°F
±2° C between –50 ~ -20°C / ±3.6° F between –58 ~ -4°F
±1° C between –20 ~ 150°C / ±1.8° F between -4oF ~ 302oF
±3° C between 150 ~ 250°C / ±5.4° F between 302° F ~ 482°F
±4° C between 250 ~ 300° C / ±7.2° F between 482° F ~ 572°F
0.1° within range
1° within range
1 Second
°C or °F factory settings
After 10 minutes of inactivity
28 (W) x 16 (H) mm
1.5 Volt, type AAA (sold without batteries)
Ca. 8,000 hours continuous work
3.5 (Ø) x 1 5 (length) mm
52 (W) x 160 (H) mm
0 ~ 50 °C / 32 ~ 122 °F