Radio - Oakcastle MP100 Instruction Manual

Instruction Guide

Radio

FM Radio
To listen to FM radio, first select 'Radio' from the main menu. To perform
an autoscan and search for stations with a good signal, follow these
steps:
1. Ensure that the headphones are connected to the device. This is
because the headphones have an in-built antenna for receiving
radio signal.
2. From the main radio interface, press the 'Menu' button (Ref.4).
3. Select 'Auto tune' from the list of options.
4. The device will ask for confirmation. Select 'Yes' to perform an auto
search, or 'No' to cancel.
5. The device will search for stations with a good signal and display
them in a list. Select the station you wish to listen to, and the
station will begin playing.
Auto tune - press 'Enter' (Ref.4) to enter auto tune mode.
FM Record - select to begin recording an FM broadcast, or listen to
previously saved recordings. Press 'Back' to save or delete (Ref.10).
Save to preset - select to save FM stations to the list of presets.
Clear preset - select to delete FM stations from the list of presets.
FM bands - select to change the FM frequency band.
EN
7