Page 1
INSTRUCTION BOOKLET 2-IN-1 STAND MIXER MODEL: 61782...
Page 2
A powerful 400W motor with 5 speeds and a pulse function for a range of baking tasks. Here at Lakeland, our award-winning family-owned business still offers the same excellent quality, value for money and exceptional customer service as when we founded the company back in the 1960s.
CONTENTS Product features ......................4-5 Safety Cautions ......................6-7 Assembling your 2-in-1 Stand Mixer and using for the first time .........8-10 Instructions for use .......................11 A guide to speed settings ....................12 Hints and tips ........................13 Frequently asked questions ....................14 Care and cleaning ......................14 Electrical connections ....................15 Recycling your electricals ....................15...
Lakeland customer care team on 015394 88100. • Do not use this appliance if the lead is damaged. If the lead is damaged it must be replaced with a special lead. Contact the Lakeland customer care team on 015394 88100.
Page 7
• To avoid injury or possible fire, do not cover the appliance when in use. • Do not connect this appliance to an external timer or remote control system. • An extension cable may be used with care. The electrical rating of the cable should be at least as great as the appliance.
ASSEMBLING YOUR 2-IN-1 STAND MIXER FOR THE FIRST TIME • Unpack the 2-in-1 Stand Mixer, remove all the packaging materials. • Before first use, wipe the mixer and stand with a clean damp cloth. • Wash all of the accessories, including the bowl, in warm soapy water, rinse and dry thoroughly.
Page 9
PREPARING THE STAND • Press the release lever downwards on the stand, raise the cradle. • Place the mixing bowl onto the base of the stand, gently twisting it until it locks into the base of the stand. • Press the release lever and lower the cradle of the stand down until it clicks into position.
Page 10
• Attach the hand mixer to the stand by placing it onto the cradle, ensuring it locks into place. • Ensure the beater or dough hook with the plastic gear sits into the cradle with the corresponding drive gear. • To remove the hand mixer press the mixer release button.
INSTRUCTIONS FOR USE • Make sure the 2-in-1 Stand Mixer is unplugged and on a level, dry surface. • When you switch on the appliance for the first time there may be a slight burning smell, this is normal and will stop after a few uses. •...
A GUIDE TO THE SPEED SETTINGS The 2-in-1 Stand Mixer has 5 speed settings. Begin mixing your ingredients on a low setting and increase the speed slowly. Please note: These are recommendations when using the mixing bowl supplied. Attachments Recommended Speed Beaters Use lower speeds for combining...
HINTS AND TIPS • If you wish to mix larger quantities, remove the mixer from the stand and use it as a hand mixer with a larger bowl. • When mixing, if the appliance starts to slow or labour, increase the speed. •...
FREQUENTLY ASKED QUESTIONS Question: Why is my 2-in-1 Stand Mixer not working? Answer: The mixer may not be plugged in or the speed has not been selected. Check the mixer is plugged in and switched on. Move the speed switch up a setting.
EU Directives: 2014/35/EU (Low Voltage Directive) and 2014/30/EU (EMC Directive). RECYCLING YOUR ELECTRICALS Along with many other high street retailers, Lakeland has joined a scheme whereby customers can take their unwanted electrical products to recycling points set up around the country.
Page 16
Lakeland Alexandra Buildings, Windermere, Cumbria, UK LA23 1BQ Tel: +44(0)15394 88100 www.lakeland.co.uk...
Need help?
Do you have a question about the 61782 and is the answer not in the manual?
Questions and answers