Care And Cleaning - Technika T50DM User Manual

Care And Cleaning

Clean the buildup such as lints on filters in time after each use, otherwise it will affect
the performance of your dryer.
Please unplug the power cord first when cleaning it.
Cleaning of filters
The lint filter must be used for drying.
It must be cleaned in time befor and after each use.
1. Remove the filters
Remove by pulling straight up with hands inserted
into the four holes around the exhaust vent shroud
'
in the sequence of Exhaust vent shroud - Lint filter -
'
Exhaust filter , as shown in figure 1.
2. Clean the lints
'
Separate exhaust vent shroud , lint filter and exhaust
'
filter and clean the lints on the filter and exhaust filter
with a soft brush or vacuum cleaner.
Do not damage the filters (as shown in figure 2)
3. Install the filters
After cleaning, assemble in the sequence of exhaust filter
'
-filter-exhaust vent shroud ,align the recesses in the center
of filter with the projection in the center of drum and make
sure that it is firmly inserted (as shown in figure 3).
Note: The filter fixed in the bottom of the drum shall also
be cleaned with a soft brush.
DO NOT USE YOUR DRYER WITHOUT THE LINT FILTER.
Clean the interior drum or dryer
housing, with wet soft cloth, if stained.
Do not wash directly with water.
Do not use thinner, gasolene or alcohol.
Do not use any type of spray cleaner when
cleaning the interior. Hazardous fumes or electric
shock could occur. If dryer drum becomes stained,
clean the drum with a damp cloth. Remove any
residue before drying the next load.
Clean cabinet with mild soap and water. Donot use
harsh or abrasive cleaners, this could damage the
dryer.
Do not let any kind of liquid get into the air
intake or on the control panel.
Exhaust
vent shroud
' ' ' '
Lint Filter
'
The filter fixed in the
bottom of the drum
Lint Exhaust
filter Filter
Lints Exhaust Filter
Figure 1
Dust Cleaner
Figure 2
Figure 3