Advertisement
LOG INSTALLATION
NOTE:
Installation instructions are the same for 18",
24", and 30" log sets. Pictures used in this manual
illustrate the 24" set. Some variation may exist
between the images and the set included with this
manual.
INSTALL 18", 24" AND 30" (F, R) BERKLEY
OAK LOGS ON NATURAL BLAZE BURNER
1. Place the #1 log (the "chunk") on the grate bar right
side of the burner adjacent to the controls. Figure 1.
2. Place front right log (#2) on right pin located on burner
and right grate bar. Figure 2. slide Log #1 forward so
that it is tight against log #2.
Figure 1. Place Ember Chunk log #1
Figure 2. Place Right Front Log #2
3. Place right rear log (#3) on pin located on rear
support bracket and rest left side of log on front right
log. See Figure 3.
2
Ember Chunk
Log #1
LG620
Right Front
Log #2
Monessen • Berkeley Oak Installation Instructions • 4604-911 Rev. A • 04/18
Right Rear
Log #3
Figure 3. Place Right Rear Log #3
4. Place left rear log (#4) on pin located on rear support
bracket on left side. See Figure 4.
Left Rear
Log #4
Figure 4. Place Left Rear Log #4
5. Place left front log (#5) on left pin located on burner
and left grate bar. Rest top right portion of log on right
front log. See Figure 5.
Left Front Log #5
Figure 5. Place Left Front Log #5
Advertisement
