Summary of Contents for logika WG-ZGWMDPB-G100-02
- Page 1 Logika Gateway WG-ZGWMDPB-G100-02 Product Manual Version 1.0 © 2019 Logika Limited...
- Page 2 Introduction Thank you for choosing Logika. Please take a moment to carefully read through the manual to ensure safe and proper installation and use. • Before use, the product must be properly installed as described in this manual by a qualified technician.
-
Page 3: Packing List
Packing List Gateway Manual Warranty Card Logika Gateway AC/DC Adapter Device Layout ZigBee Network Indicator SET Button Zigbee Network Setting SYS Button Ethernet Indicator Ethernet Port System Indicator Micro USB Port Power Indicator DC-5v Power... -
Page 4: Specifications
Features • Communication Mode: IEEE-802.15.4 Zigbee. Connects up to 65,000 devices. • • Complete mesh network, allowing complete coverage of the premises. Easy device discovery and setup. • Connects to router via Ethernet. • • Energy saving and low power consumption. AES128-bit encryption, safer communication. -
Page 5: Installation Steps
2) The Zigbee Network Indicator should now flash once every second to indicate that its been set up correctly. The Gateway is now ready to work with your Smart Home app. Please refer to the Logika Smart Mobile App user manual, which will take you through the steps of using the app to connect the... - Page 6 Additional Functions for Troubleshooting Add Devices to your Zigbee Network for the First Time 1) Press the SET button 4 times in quick succession. 2) The Zigbee Network Indicator should now stay on. This means devices can now be discovered by the Gateway. The light will stay on for around 4 minutes, at which point it will time out.
-
Page 7: Troubleshooting
Power off and power the Gateway back on. • If none of the above work, please contact us. The issue you are experiencing is not mentioned here. Please contact us at support@logika.nz with your issue and we will do our utmost to help!