Office Star Products Space Seating 818-41G9C18P Operating Instructions

1
2

LIMITED WARRANTY

SPACE ® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
818-41G9C18P / 818-31G9C18P / 818-11G9C18P
818-41R9C18R / 818-41P9C1A8
MATREX BACK MANAGER'S CHAIR

OPERATING INSTRUCTIONS

FEATURES
• BACKREST LOCKING ADJUSTMENT
• SEAT SLIDER
• TILT TENSION ADJUSTMENT
5
• SEAT HEIGHT ADJUSTMENT
NOTE: It is normal for chair to slightly lower
• ARM HEIGHT ADJUSTMENT
3
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs
3. Check that all bolts screws and knobs are tight every
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic
6. Do not use chair as a stepladder.
4
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
Turn knob (1) clockwise to lock backrest in position, to unlock,
turn knob (1) counter-clockwise and lean back to release
anti-kick back mechanism.
Lift lever (2) to slide seat, release lever (2) when desired
position is reached.
Turn knob (3) clockwise to increase tilt tension and turn
knob (3) counter-clockwise to decrease tilt tension.
To raise seat height, remove pressure from seat and lift
lever (4) up. To lower seat height, sit on chair and
lift lever (4) up.
under body weight.
To adjust arm height, push button (5) in to allow the arms to
move up or down freely. Release button (5) once the desired
height is reached.
are securely tightened.
three months or as needed.
cover as head covering. It may cause suffocation.