Fiat 500 Series User Manual - Original Instructions page 17

The kickscooter must be powered-off before proceeding with
charging.
Do not use the kickscooter when charging the battery.
1. Open the protective cover on the kickscooter.
Ensure the charging port is dry and insert the battery-charger
into the kickscooter charging port. The other end of the charger
must be connected to the mains to activate the charger.
First, connect the cable of the battery-charger to the kickscooter.
Then, connect the mains.
2. The indicator light on the charger will be red: this grants that the
charge is proceeding.
3. When the indicator light is turned to green color, the battery is
fully charged. Please stop charging or the battery life will be
reduced. Charging time is around 3-4 hours. Too long charging
time will affect the battery life.
4. Remove the cable of the battery charger. Put the cover back to
position.
WARNING
When battery is completely empty (0% charge), a normal charge of
3-4 hours might not be sufficient.
It is necessary to proceed with a 24 hours charge.
Keep the product and the battery at the recommended temperature
to keep the highest efficiency of the scooter and of the battery.
17