NAUTICA 2039 Manual
  1. Manuals
  2. Brands
  3. NAUTICA Manuals
  4. Watch
  5. 2039
  6. Manual

NAUTICA 2039 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2039 and is the answer not in the manual?

Questions and answers

Ed price
April 6, 2025

How do you activate the battery

User image 67f2a6b0d5dc4
0

Subscribe to Our Youtube Channel

Related Manuals for NAUTICA 2039

Summary of Contents for NAUTICA 2039

  • Page 2 CONGRATULATIONS ON OWNING YOUR NEW NAUTICA WATCH DEVELOPED FROM ADVANCED ELECTRONICS TECHNOLOGY, THE MOVEMENT IS MANUFACTURED FROM THE BEST QUALITY COMPONENTS AND POWERED BY A LONG LIFE BATTERY.

  • Page 4: Table Of Contents

    PAGE WATCH INFORMATION AND CARE 2 - 5 OPERATING INSTRUCTIONS BASIC MODELS 6 - 7 DATE MODELS 8 - 9 MULTI MODELS 10 - 13 INDIGLO MODELS 14 - 15 CHRONOGRAPH MODELS 16 - 52 ANALOG & DIGITAL MODELS 53 - 62 DIGITAL MODELS 63 - 66 SPECIAL MODELS...
  • Page 5 NAUTICA watches have been developed with the highest attention to quality, function and detail, as befits the NAUTICA tradition. Please read the following instructions carefully to fully understand all of the functions of your finely crafted timepiece. WATER-RESISTANCE If your watch is water-resistant, it will be indicated on the watch face or on the caseback.
  • Page 6 Light will appear immediately. Your NAUTICA watch featuring INDIGLO Night-Light contains a patented electroluminescent technology (U.S. Patent Number 4,527,96 and 4,775,964). The INDIGLO Night-Light illuminates the entire watch lens with a uniform bright light that offers superior readability in all low light and nighttime conditions.
  • Page 7 SCREW-IN SETTING CROWN STICKER Some deep-depth water-resistant watches require the setting crown to be screwed in to ensure water-resistancy. If your Nautica watch has a transparent sticker at back of the case back (diagram above) please unscrew the crown before setting your watch, and the crown must be screwed in after setting the watch.
  • Page 8 ELAPSED TIME RING If your watch is equipped with a rotating outer dial with numbers and indicators, this Elapsed Time Ring may be used to indicate the length of time remaining for an activity or the starting time of an activity. TIME REMAINING - set the outer ring so that the triangle is pointing to the time the activity is to end.

  • Page 9: Basic Models

    BASIC MODELS CROWN POSITION CROWN POSITION Y121, 2039, 2036, 608/1010 VX10 / VX51 / YL60 / 4S20 CROWN POSITION 336/168...
  • Page 10 TIME To set the time: 1. Pull crown to “B” position. 2. Turn crown clockwise /counter clockwise to correct time. 3. Push crown to “A” position.

  • Page 11: Date Models

    DATE MODELS DATE A B C CROWN POSITION VX12 / VX42 / VX32 / VX82 / 2315 / 2115 / 2415 / AL32 DATE A B C CROWN POSITION VX33...
  • Page 12 TIME To set the time: 1. Pull out crown to “C” position. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push in crown to “A” position. CALENDAR To set the calendar/date: 1. Pull out crown to “B” position. 2A.

  • Page 13: Multi Models

    MULTI MODELS DATE DATE A B C A B C CROWN CROWN POSITION POSITION 24 HOUR 24 HOUR VX3J VX3L 24 HOUR A B C A B C CROWN CROWN 24 HOUR POSITION POSITION DATE DATE VX3R VX3N / VX7N A B C A B C CROWN...
  • Page 14 TIME To set the time: 1. Pull crown to “C” position. 2. Turn crown either way to correct time. 3. Push crown to “A” position. DATE To set the date: Note: the date changes automatically every 24 hours. 1. Pull crown to “B” position. 2.
  • Page 15 DATE CROWN POSITION 24 HOUR 6P27 DATE A B C CROWN POSITION 24 HOUR 6P23 DATE A B C CROWN POSITION 24 HOUR 6P29...
  • Page 16 TIME To set the time: 1. Pull crown to “C” position. 2. Turn crown either way to correct time. 3. Push crown to “A” position. DATE To set the date : 1. Pull crown to “B” position. 2. Turn crown counter clockwise to correct date. 3.

  • Page 17: Indiglo Models

    INDIGLO MODELS DATE A B C CROWN POSITION M905 To activate the Indiglo: Press crown to indicate Indiglo night light. TIME To set the time: 1. Pull crown to "C" position. 2. Turn crown clockwise / counter clockwise to correct time. 3.
  • Page 18 CALENDAR To set the date: 1. Pull crown to "B" position. 2. Turn crown counter clockwise or towards you to correct date. 3. Push crown to "A" position. Note: The date changes automatically every 24 hours.

  • Page 19: Chronograph Models

    CHRONOGRAPH MODELS STOPWATCH 1/20SEC. HAND PUSHER “A” SMALL SECOND HAND STOPWATCH SECOND HAND STOPWATCH MINUTES HAND STOPWATCH HOUR HAND YM92 STOPWATCH MINUTE HAND PUSHER “A” CROWN POSITION CHRONOGRAPH HAND A B C 1/5 SECOND PUSHER “B” SECOND HAND YM91 MINUTE HAND PERMANENT SECOND HAND PUSHER “A”...
  • Page 20 This Chronograph watch has three functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position “C”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “A”. CALENDAR To set the calendar: 1.
  • Page 21 Before using the stopwatch, reset the stopwatch hands. To the “12” and “0” position. STANDARD STOPWATCH MEASUREMENT: 1. Press pusher “A” to start timing. 2. Press pusher “A” to stop timing. 3. Press pusher “B” to reset. ACCUMULATED ELAPSED TIME MEASUREMENT: 1.
  • Page 22 SPLIT TIME MEASUREMENT: 1. Press pusher “A” to start the timing of the first runner. 2. Press pusher “B” to stop and record the timing of the first runner. (Once pusher B is activated, even though the stopwatch 1/20 sec. hand and the big stopwatch sec. hand stop on the dial, the stopwatch still continues to time internally.) 3.
  • Page 23 5. Press pusher “B” repeatedly to set stopwatch second hand to “0” position. 6. Push crown to position “A”. Remarks: This is suggested to check the hour and minute hands to ensure they are correct before pushing the crown back to position “A” TO ADJUST STOPWATCH HAND (for YM92) : 1.
  • Page 24 6. Press pusher “A” for 2 seconds. 7. Press pusher “B” to “0” setting for the stopwatch min. / hour hand. If the hand is not at “0” or “12” position, then, press pusher “B” repeatedly, until the hand moves by each intervaI and returns to “0” or “12”...
  • Page 25 MINUTE HAND 24-HOUR HAND STOPWATCH MUNUTE HAND PUSHER “A” A B C HOUR HAND CROWN POSITION STOPWATCH SECOND HAND PUSHER “B” CALENDER SECOND HAND FS00 / FS01 HOUR HAND MINUTE HAND 24-HOUR HAND PUSHER “A” A B C STOPWATCH MUNUTE HAND CROWN POSITION PUSHER “B”...
  • Page 26 This Chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position “C”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “A”. CALENDAR To set the calendar: 1.
  • Page 27 CORRECTING STOPWATCH HANDS If after resetting the stopwatch hands it is found that they are not at the '12' or '0' position, correct them as follows: 1. Pull crown to “ C” position. 2. Press pusher “A” continuously, the stopwatch hand will advance rapidly until it gets close to the “...
  • Page 29 PERMANENT SECOND HAND MINUTE CHRONO HAND PUSHER “A” A B C STOPWATCH SECOND HAND CROWN POSITION PUSHER “B” HOUR CHRONO HAND DATE 5030D DATE PERMANENT SECOND HAND MINUTE CHRONO HAND PUSHER “A” A B C STOPWATCH SECOND HAND CROWN POSITION PUSHER “B”...
  • Page 30 This Chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position “C”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown back to position “A”. Calendar To set the calendar: 1.
  • Page 31 Before using the stopwatch, reset stopwatch chrono hands to the “12” and “0” position. Standard Stopwatch Measurement 1. Press pusher “A” to start timing. 2. Press pusher “A” again to stop timing. 3. Press pusher “B” to reset. Accumulated Elapsed Time Measurement 1.
  • Page 32 (Once pusher “B” is activated, even though the chrono minute hand and the big stopwatch sec. hand stop on the dial, the stopwatch still continues to run internally.) 3. Press pusher “B” to catch up the timing of the second runner. The stopwatch sec.
  • Page 33 After finishing the big sec. stopwatch hand adjustment, press crown back to position “A” to terminate the adjustment. TO ADJUST THE 1/10 SECOND COUNT HAND (FOR 5040B) After activating the corrective mode, if the 1/10 second counter hand is not located at '12' or '0' position, press pusher “B” once to activate the corrective mode of the 1/10 second counter hand.
  • Page 34 Press pusher “A” continuously or repeatedly until the hand moves by each interval and returns to “12” and “0” position. Press crown back to position “A” to terminate the adjustment. Once finished adjusting all stopwatch chrono hands, press crown back to “A” position to terminate adjustment.
  • Page 35 24 HOUR HAND 24 HOUR DISK STOPWATCH MINUTE HAND PUSHER “A” STOPWATCH MINUTE DISK STOPWATCH A B C A B C SECOND HAND CROWN CROWN POSITION POSITION STOPWATCH SECOND HAND PUSHER “B” PUSHER “B” DATE SECOND HAND DATE OS2B SECOND HAND STOPWATCH MINUTES HAND MINUTE HAND...
  • Page 36 This Chronograph watch has three functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position "C". 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position "A". CALENDAR To set the calendar: 1.
  • Page 37 CORRECTING STOPWATCH HAND If after resetting the stopwatch second hand it is found that they are not at the '12' or '0' position, correct as follows: 1. Pull crown to "C" position. 2. Press pusher “A” continuously, the stopwatch second hand will advance rapidly until it gets close to the “12”...
  • Page 39 24-HOUR HAND STOPWATCH MINUTE HAND A B C CROWN POSITION PUSHER “B” STOPWATCH SECOND HAND DATE VD53 STOPWATCH SECOND HAND PUSHER A A B C CROWN POSITION PUSHER B STOPWATCH MINUTE HAND DATE VD51...
  • Page 40 This Chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position “C”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “A”. CALENDAR To set the calendar: 1.
  • Page 41 STANDARD STOPWATCH MEASUREMENT: 1. Press pusher “A” to start timing. 2. Press pusher “A” to stop timing. 3. Press pusher “B” to reset. split time Measurement Example of using split time measurement for two runners. Two runners can be timed simultaneously; the first runner’s time can be recorded while the second runner’s time will continue to be accumulated until he finishes.
  • Page 42 TO ADJUST STOPWATCH HAND 1. Pull crown to position "C". 2. Press pusher "A" continuously or repeatedly to adjust the stopwatch second hand to "0" or "12" position. 3. Press pusher "B" continuously or repeatedly to adjust the stopwatch minute hand to "0" or "12" position. 4.
  • Page 43 PERMANENT SECOND HAND STOPWATCH MINUTE HAND PUSHER A A B C STOPWATCH SECOND HAND CROWN POSITION DATE PUSHER B 8171/201 PERMANENT SECOND HAND STOPWATCH MINUTE HAND PUSHER A STOPWATCH SECOND HAND A B C CROWN POSITION PUSHER B DATE DATE 8171/202 PERMANENT SECOND HAND STOPWATCH MINUTE HAND...
  • Page 44 This Chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position “C”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “A”. CALENDAR To set the calendar: 1.
  • Page 45 STOPWATCH The stopwatch is capable of measuring: 1. 1 minute elapsed up to 30 minutes. 2. Chronograph hand 1/5 second. Before using the stopwatch, reset the stopwatch hands to the “12” & “0” position. STANDARD STOPWATCH MEASUREMENT: 1. Press pusher “A” to start timing. 2.
  • Page 46 TO ADJUST STOPWATCH HAND: 1. Pull crown to position "B". 2. Press pusher "A" continuously or repeatedly to adjust the stopwatch second hand to "0" or "12" position. 3. Press pusher "B" continuously or repeatedly to adjust the stopwatch minute hand to "0" or "12" position. 4.
  • Page 47 STOPWATCH MINUTE HAND DATE A B C STOPWATCH HOUR HAND CROWN POSITION STOPWATCH SECOND HAND DAY HAND OS62 This Chronograph watch has three functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1. Pull crown to position "C" , the small hand at 6 o'clock returns to "60"...
  • Page 48 STOPWATCH This stopwatch is able to measure and display time in 1/20 ( 1/1) second united up to max 11 hrs 59 min 59 sec. The retrograde stopwatch 1/20 ( 1/1) second hands keeps continuously running for 60 seconds after starting, and then stops at "0"...
  • Page 49 24 HOUR HAND STOPWATCH MINUTE HAND PUSHER A CROWN POSITION PUSHER B SECOND HAND STOPWATCH SECOND JS00 HAND This Chronograph watch has two functions: TIME, STOPWATCH TIME To set the time: 1. Pull crown to position "B". 2. Turn crown clockwise to correct time. 3.
  • Page 50 STOPWATCH This stopwatch is able to measure and display time in 1 second intervals up to max 29 min 59 sec. It will stop automatically after running continuously for 30 minutes. 1. Press pusher "A" to start timing. 2. Press pusher "A" again to stop timing. 3.
  • Page 51 DAY HAND PUSHER A STOPWATCH MINUTE HAND A B C CROWN POSITION STOPWATCH SECOND HAND PUSHER B SECOND HAND DATE FS60 / FS61 This Chronograph watch has four functions: TIME, CALENDAR, DAY OF WEEK, STOPWATCH TIME To set the time: 1.
  • Page 52 To set the day: 1. Pull crown to position "B". 2. Turn crown counter clockwise to correct day. 3. Push crown to position "A". STOPWATCH: This stopwatch is able to measure and display time in 1 second intervals up to max 59 min 59 sec. After elapsed for 59 min.
  • Page 53 MINUTE HAND CENTER HAND PUSHER A UPPER HAND DATE A B C CHRONO HOURS / TIME ZONE CROWN POSITION HOUR HAND CHRONO MINUTES SCALE PUSHER B SECOND HAND LOWER HAND M363 This Chronograph watch has 3 functions: TIME, CALENDAR, STOPWATCH TIME To set the time: 1.
  • Page 54 CALENDAR To set the Calendar: 1. Pull crown to position ”B” 2. Turn crown counter clockwise to correct the calendar. 3. Push crown back to position “A”. STOPWATCH This stopwatch is capable of measuring and displaying 1/5 second up to maximum 4 hours. 1.
  • Page 55 To set the Second Time Zone: 1. Pull crown to position “B”. The 4th center hand will display the minutes of the second time zone. 2. Press pusher “A” to set the hour of second time zone. 3. Press pusher “B” to set the minutes. 4.

  • Page 56: Analog & Digital Models

    ANALOG AND DIGITAL MODELS START / STOP SET / INDIGLO CROWN LAP / RESET MODE M12-1515 This Analog and Digital watch has 6 function: Analog and digital time display / Auto calendar 2000-2099 / Two time zones / Two daily alarms linked to time zone / Three linked countdown timers / Chronograph with 42-lap memory / Indiglo Night Light.
  • Page 57 3. Press MODE to cycle through CHRONO, RECALL, TIMER, ALARM and TIME modes. Press and hold MODE in any mode to return to TIME display. 4. When setting digits, press START/STOP to go forward or LAP/ RESET to go backward or hold to change rapidly. ANALOG TIME To set the time: 1.
  • Page 58 5. Press MODE to select MINUTES, YEAR, MONTH, DAY, DAY of WEEK, 12 or 24 time display, MONTH-DAY or DAY-MONTH date display. Press START/STOP or LAP/RESET to advance selected item. 6. Press SET/INDIGLO when done. 7. Press and hold LAP/RESET and wait for beep to change display to second TIME ZONE.
  • Page 59 COUNTDOWN TIMER 1. Press MODE until TIMER appears. Press LAP/RESET to select LOOP 1, 2 or 3. Timers will count upwards starting with last LOOP TIMER set, unless last LOOP TIMER set is 3 (timers will then count backwards from LOOP 3). 2.
  • Page 60 7. Press START/STOP to start or stop LOOP TIMER. 8. With TIMER stopped, press and hold SET/INDIGLO to reset all LOOPS to zero. At end of timed LOOP, next LOOP TIMER starts. Cycle is continuous for up to 30 loops. ALARM Press MODE until ALARM appears.
  • Page 61 Alarm symbol ( ) will appear in TIME display when ALARM is armed for that TIME ZONE. Beep will sound when ALARM time is reached. Press any button to silence alarm. INDIGLO @ NIGHT LIGHT Press SET/INDIGLO to illuminate watch face. Patented (U.S. pat. 4,527,096 and 4,775,964) electroluminescent technology used in the INDIGLO®...
  • Page 62 START / STOP LIGHT CROWN MODE MW36 This Digital watch has 7 functions Analog and Digital Time display / Dual Time / Calendar / Chronograph / Timer / Alarm / Electroluminescent backlight MODE SELECTION Press “Mode” button to cycle through “TIME”, “ALARM”, ”CHRONOGRAPH”...
  • Page 63 DIGITAL TIME AND CALENDAR To set the time and calendar: 1. Press “Mode” button until time mode appears. 2. Press and hold “Set” button to begin setting time. 3. Press “Mode” button to select the setting item in the order, Second ➞...
  • Page 64 To set the Alarm: 1. Press “Mode” button until alarm mode appears. 2. Press and hold “Set” button to begin setting alarm. 3. Press “Mode” button to select the alarm hour or minute for setting. 4. Press “Start/Stop” button to set the alarm hour or minute. 5.
  • Page 65 ("SPL" will blink on the display if the split time function is active. Even though the stop watch is not on display, the timing will continue to run internally.) 3. Press “Set” button again to see the timing of the second runner. The stopwatch will switch to display the internal accumulated time and continue timing of the second runner.

  • Page 66: Digital Models

    DIGITAL MODELS ADJUST LIGHT CROWN MODE MW32 This Digital watch has 6 functions Time / Calendar / Day of week / Chronograph / Alarm / Electroluminescent backlight MODE SELECTION Press “Mode” button to cycle through “TIME”, ”CHRONOGRAPH”, “ALARM” and “TIME SET” mode.
  • Page 67 TIME MODE In time mode, the watch displays the current time information on hour, minute, second, date, month and day of week. It also displays the "ON/OFF" status of Alarm or Chime. CHRONOGRAPH MODE The stop watch counts up to 19 hours 59 minutes 59.99 seconds with 1/100 second and split time function.
  • Page 68 2. Press “Set” button to stop and record the timing of the first runner. ("Split" will blink on the display if the split time function is active. Even though the stop watch is not on display, the timing will continue to run internally.) 3.
  • Page 69 Chime Function The Beep will sound every hour after activating the chime function. TIME SET MODE 1. Press “Mode” button until Time Set mode appears. 2. Press “Set” button to select the setting item in the order, Second ➞ Hour ➞ Minute ➞ Month ➞ Date ➞ Day of Week 3.

  • Page 70: Special Models

    SPECIAL FUNCTION MODELS SMALL SECOND HAND MINUTE HAND PUSHER A TIDE AMPLITUDE AND MOON PHASE COUNTER HAND A B C CROWN POSITION HOUR HAND DATE PUSHER B 8272 TIDE CYCLE HAND TIDE CYCLE COUNTER This Chronograph watch has 3 functions: TIME, CALENDAR, TIDE TIME To set the time:...

  • Page 71: Tide

    CALENDAR To set the calendar: 1. Pull crown to position “B”. 2. Turn crown clockwise to correct calendar. 3. Push crown to position “A”. TIDE FUNCTION To set the Tide Function - Central Hand The tide cycle takes place over one revolution of the dial in 12 hours 25 minutes and 14 seconds.
  • Page 72 To set the Tide Amplitude (Moon Phase) – Counter at 10 o’clock small eye The tide amplitude counter performs one revolution in 29 days 12 hours and 44 minutes. 1. Press and hold pusher “A” to 3 seconds after the beep indicated for enter in setting mode.
  • Page 73 CENTER HAND MINUTE HAND 24 CITIES PUSHER A UPPER HAND DATE A B C WORLD TIME SCALE CROWN POSITION HOUR HAND PUSHER B PUSHER C SECOND HAND SEASON SCALE LOWER HAND M366 This watch has 4 functions: TIME, CALENDAR, WORLD TIMES, SEASON TIME To set the time: 1.

  • Page 74: World Time

    CALENDAR To set the CALENDAR: 1. Pull crown to position ”B” 2. Turn crown counter clockwise to correct the calendar. 3. Push crown back to position “A”. WORLD TIME To Set the World Time: 1. Pull crown to position “B”. The 4th center hand shows the world time zone city and the upper hand shows the world time.
  • Page 75 4. Press pusher “A” or “B” to move the 4th center hand backward or forward to adjust the world time, respectively, to set the world time zone to be the same as the home time zone. Press and hold a pusher to change the time quickly. The hands move together as the center hand makes one revolution, the upper hand moves one hour.
  • Page 76 3. Push back the crown to position “A”. Note: If no pusher is pressed within five seconds of the hands stopping, the watch will proceed to the world time setting operation (see WORLD TIME setting). SEASON SETTING The season setting allows the watch to compensate for daylight savings time (also called “summer time”).

  • Page 77: High Performance Models

    HIGH PERFORMANCE MODELS PUSHER A A B C CROWN POSITION PUSHER C PUSHER B M314 This watch has 6 functions: TIME, CALENDAR, TIDE, TEMPERATURE, COMPASS and NIGHT LIGHT ® INDIGLO NIGHT-LIGHT Press the crown to activate the light.
  • Page 78 TIME To set the time: 1. Pull crown to position “C” 2. Turn crown clockwise / counter clockwise to correct time 3. Push crown to position “A” CALENDAR To set the calendar: 1. Pull crown to position “B” 2. Turn crown clockwise / counter clockwise to correct calendar 3.
  • Page 79 TIDE / TEMPERATURE SELECTION Tide Function: - Press B (TIDE) push button to select the tide clock. (The indicator hand moves to low tide and then to current tide) Temperature Function: - Press A (TEMP) push button to select the thermometer.
  • Page 80 Tides are influenced by moon and sun and shape of shoreline, so tide clock cannot precisely give times of high and low tides. Periodic adjustment may be necessary. To set the Tide Function – Indicator Hand 1. Pull crown to position “B”. 2.
  • Page 81 magnetic field around the watch. Do not store the watch near any source of magnetism, such as a computer, appliance, or television, as the watch can take on a magnetic charge, yielding inaccurate headings. Typical accuracy of wrist-worn instruments is within +/- 10 degrees.
  • Page 82 declination angle, turn the compass ring until north is at 12 o’clock. 6. Press A or B pusher to move the indicator hand west (-) or east (+), respectively, to point to your location’s declination angle using the declination scale. Hold a button to move the hand quickly. MAGNETIC DECLINATION SET TO -14°...
  • Page 83 A B C CROWN POSITION VS37 This watch has 3 functions: TIME, CALENDAR and SOLAR POWER TIME To set the time: 1. Pull crown to position “C”. 2. Turn crown clockwise / counter clockwise to correct time. 3. Push crown to position “A” CALENDAR To set the calendar: 1.

  • Page 84: Solar

    SOLAR POWER BAYSIDE - The guideline for charging time Illumination Source of Environment (lx) light (approx. hours) (approx. hours) (approx. minutes) Inside the office A fluorescent lamp 3.000 30W 20 cm 10.000 Cloudy Sun light 100.000 Fine weather COCOA BEACH - The guideline for charging time Illumination Source of Environment...

  • Page 85: Depth

    DEPTH SCALE A B C CROWN POSITION 4TH CENTER HAND PUSHER LOWER HAND M367 OFF INDICATOR This watch has 4 functions: Time, Calendar, Temperature and Depth Sensor TIME To set the time: 1. Pull crown to position “C” 2. Turn crown clockwise / counter clockwise to correct time 3.

  • Page 86: Depth

    CALENDAR To set the calendar: 1. Pull crown to position “B” 2. Turn crown counter clockwise to correct calendar 3. Push crown to position “A” Note: Don't change the date between 10pm and 2am as it could damage the movement. *** Please pull up the crown cover before unscrewing the crown for setting *** TEMPERATURE...
  • Page 87 Note: If the readings remain in the range of 0 to 2 meters (0-6 feet) for 5 minutes, the sensor will turn off automatically. Turn off the Sensor: After turning on the sensor, you can turn it off manually. 1. Press and hold pusher for 2 seconds. 2.
  • Page 88 Level, and Replace Battery Level, with each level indicated by the movement of the second hand. In Normal Level, the second hand will move one hand position every one second. In Battery Low Level, the second hand will only move at 2-second intervals and shall move by two hand positions.
  • Page 89 DEPTH GAUGE INDICATOR DEPTH GAUGE INDICATOR If your watch is equipped with a depth gauge indicator, when you make your descent the water pressure around you increases and water enters the tunnel beneath the glass. The numbers on the inner bezel show the approximate depth in meters.

This manual is also suitable for:

Y1211010Vx51Vx10Yl60336 ... Show all

Table of Contents