Carrying Loomo - Segway Robotics Loomo Product Information Manual

3.3 Extension bay converter (optional)
When attached, it provides direct access to a USB 2.0 port and a 24V (1A limit) power supply.
USB Port
Remove the rubber cap Align the extension bay
1 2
covering the hardware converter with the
extension slot. interface slot, and then
press it tightly.
06
Power Port
Securely fasten the
3
extension bay converter by
rotating the knob.
4.

Carrying Loomo

Lifting
When Loomo is powered on, make sure to use the lifting handle to lift and carry Loomo as shown above. Because of Loomo's
self-balancing mechanism, incorrectly lifting it by its mainframe or fenders may cause its wheels to spin haphazardly. This in turn may
bring danger to you and others around you.
Holding the button inside of the handle will temporarily stop Loomo's engine, allowing you to safely carry the robot.
Push & Move
Please make sure to hold the Hand Touch-Bar when pushing or moving Loomo manually.
In order to maintain its current position, Loomo will reject from any external disturbance. If you move Loomo in the incorrect way, you
will feel a resistant force.
Avoid pushing Loomo over stairs or obstacles.
07