Page 2
CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. SKU 90443 PAGE 2...
Page 3
When unpacking, check to make sure all parts shown on the Parts List (page #6) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 4
To remove the cork, spread the Handles apart slightly while bringing the Gear Wheel Handles up and over. This positions the cork up between the two Handles (#20). Squeeze the two Handles together around the cork and keep it in place while the Spiral-bit (#8) releases from the cork. SKU 90443 PAGE 4...
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 90443 PAGE 5...
Iron Underlay Oriented Pole Handle Shaft Rack Spiral-bit Jacked for Handle Oriented Pole Pole Steel Ball Pedestal Stainless Steel Mirror Spring A Fixup Rack Foil Cutter Dowel Slicing Knife Oriented Sheath Rivet Rivethead Center Rack PARTS ASSEMBLY SKU 90443 PAGE 6...
Need help?
Do you have a question about the 90443 and is the answer not in the manual?
Questions and answers