How To Supply Water Directly - LG HW306 Series Owner's Manual

HOW TO INSTALL
10

How to supply water directly

* Supply water directly to the water tank
when pouring a large amount of water.
1. Turn off the power by pressing
start/stop (
2. Unplug the power from receptacle.
3. Unplug the power from the body.
4. Disassemble the body and water
tank and keep them as shown in the
picture.
CAUTION
• Leaving the product upside down or
cleaning it with water may cause fire,
electrical shock, or product failure.
5. Disassemble the moisture disk and
water tank.
CAUTION
• Note that water may fall when
disassembling the moisture disk.
• Keep the moisture disk safe.
Otherwise, injury and property
damage may result.
) button.
6. Supply clean tap water up to the
WATER LINE of the water tank.
CAUTION
• Remove foreign substances without
damaging metallic plate (if there is one).
• Empty the water tank before
supplying water.
- It will cause odor.
Important

LG premium humidifier uses very small
water particles. Bacillus and metallic
molecules cannot enter small water
particles. Water particles are used
to humidify but bacillus and metallic
molecules remain in the product and
become enriched in the water tank.
Such substances may cause smell and
discoloration. You may preserve the
cleanliness of the product by emptying
the remaining water in the water tank
when supplying water.
7. Assemble the moisture disk in
reverse order and use the product.
CAUTION
• Install the product by properly matching
the moisture disk and the water tank.
- This may cause noise and/or product failure.
• Install the product by properly matching
the body and the water tank.
- This may cause noise and/or product failure.