How To Find The Tv's Video Input Channel - GE DGE505N User Manual

15909540 FINAL 7/25/02 8:11 AM
How to find your TV's Video Input Channel
In order to see what's playing on your DVD Player, you need to tune the TV to the Video Input Channel that corresponds to the jacks you used to
hook up the recorder to the TV. The Video Input Channel(s) varies for different brands and different models of TVs. Below are some things to try.
• Consult the Owner's Manual that came with your TV.
• If you can't find the information in the manual, or can't find the manual, review the following list of ways to access Video Input Channels on
TVs.
• There might be a button on the TV's remote control that accesses the Video Input Channel (see table below for examples).
• You might select the Video Input Channel from the TV's menu system.
• You might tune to it by pressing a specific channel number (see table below)
• Press the Channel up and/or down buttons on the TV's remote control (sometimes the Video Input Channel is stored in the channel list).
Video Input Channel Variations
Button/Switch
on the TV
VIDEO VID1
SIGNAL LINE
VID 1 VID
VID 2 VIDEO
54
Page 54
Button on the
TV remote Channel Number
S-VID
INPUT
SOURCE
AUX
Graphics contained within this publication are for representation only. Your unit might differ slightly.
Chapter 5: Additional Information
00 93
90 VID 1
91 VID 2
92 INPUT