Manual Channel Set-Up; Adjusting The Picture; Adjusting The Sound - THOMSON TX807C Owner's Manual

tx807en2 15/01/03 12:26

Manual Channel Set-up

With the manual set-up
1. Display the menu by pressing a number of times
on the remote control menu key:
- twice for the mono TV sets.
- 3 times for the stereo TV sets.
The first line (Standard) is selected.
Depending on the model of your TV set, youÕll have
to select from the options listed below the one that
fits with your country:
EURO : Western Europe, Tunisia, Morocco
FR : France, Luxembourg
UK : United Kingdom, Eire
DK : Eastern Europe, Middle East, Africa,
French DOM-TOM
Select corresponding option by means of the
directional keys Left/Right.
2 .Select the Mode line through the Up/Down
directional keys.
3. By means of the Left/Right directional keys, select
ANTENNA (reception through an aerial antenna) or
CABLE (reception through a cable network) for a
Channel set-up, or MHz for a Frequency set-up.
4. Select the CH or CC line through the Up/Down
directional keys.
5. Start the set-up in a decreasing or increasing order
by means of the Left/Right directional keys.
When a channel is found, the pictures appear. If the
picture quality is poor, make use of the directional
keys Up/Down to select the line ->.<- and try to
improve picture quality with the directional keys
Left/Right.
6. Select the Decod. line through the Up/Down
directional keys
7.If the station is encrypted and if you want to
connect a decoder to the AV socket, tick the box with
the Left/Right keys.
8. Then select the Pr line through the Up/Down
directional keys and enter the channel number
corresponding to the pictures. You may also use the
Left/Right keys.
9. Select the Text line through the Up/Down keys
and choose the character set table to be used for
videotext:
Page 5
1: Western Europe
2: Eastern Europe, Russia
3: Greek
4: Arab
5: Ukrainian
6: Bielo-Russian
For more details, refer to the table on the next page.
10. Store the programme by pressing OK.
To find the next programme, re-start Channel Set-up
by means of the directional keys Left/Right.
Once the set-up achieved, close the menu through
exit.
Press the menu key once to display the menu.
Through the Up/Down keys, select the function you
want to adjust (Brightness, Colour, Contrast,
Sharpness, Tint). Adjust with the Left/Right keys.
Adjustment of tone is only possible and necessary for
an NTSC image.
If you wish to preserve these adjustments as
preferential, press the red button to memorise them.
YouÕll then be able to recall them later on.
Close the menu through exit.
Settings are stored until you proceed to another
change.
(only on stereo models)
Press the menu key twice to display the menu.
Through the Up/Down keys, select the function you
want to adjust (Treble, Bass, Balance, Mode).
With the Left/Right keys, adjust the Treble or Bass
level, the balance between left and right paths and the
type of sound you want (Mono or Auto).
If Auto has been selected, the TV set will automatically
adjust to the sound transmitted by the channel.
If you want to preserve these adjustments as
preferred settings, press the red key during 3 seconds
to store them.
YouÕll then be able to recall them later on.
Close the menu through exit.
Settings are stored until you proceed to another
change.
5

Adjusting the Picture

Adjusting the Sound