QNect Q04 User Manual

Q04 WIRELESS HEADPHONES
For best use of this device, we recommend that you read this user manual carefully and keep it for your records.
PACKAGE CONTENT
a. Wireless On-Ear Headphones
b. USB Charging Cable
c. 3,5 mm Audio Cable
d. Manual
KEY FEATURES
• Compatible with Bluetooth-enabled devices
• Also works as wired headphones with Audio cable
• Built in Microphone
• Built in rechargeable battery
• Volume and media control
SAFETY INSTRUCTIONS
• Keep the unit away from heat sources, direct sunlight,
humidity and water. This product is not a toy. Keep
out of reach of children.
• Do not use the unit at excessive levels as this may
couse hearing damage.
CHARGING THE HEADPHONES (#6)
The headphones come with a built in rechargeable bat-
tery. Before using them for the first time, we recom-
mend charging the battery fully. Only use the supplied
micro USB cable to charge the battery.
Connect the USB cable to a computer USB port and the
micro USB plug to the charging jack of the headphones.
The red LED light will illuminate while the headphones
are charging. When the battery is fully charged, the LED
light will turn off automatically.
TURNING THE HEADPHONES ON/OFF (#1)
Power On: Press and hold the multi-function button for
2 seconds. You will hear a sound indicating the head-
phones is on.
Power Off: Press and hold the multi-function button for
2 seconds.
PAIRING THE HEADPHONES
1. Turn the headphones on and the LED indicator will
start flashing blue and red. This will indicate that
your headphones are now in pairing mode.
2. Place the headphones and the Bluetooth device to
which you would like to pair within the operating
distance.
BY QNECT
Thank you for purchasing your Bluetooth Wireless Headphones.
d.
c.
3. Ensure the Bluetooth feature is enabled on your
phone or music device.
4. Once you have activated Bluetooth on your device,
select "Q04" from the list of available Bluetooth de-
vices.
5. Please note, pairing mode on the headphones will
last for two minutes. If no devices are paired after
two minutes, the headphones will automatically re-
peat the pairing process.
6. If the pairing is unsuccessful, turn off the head-
phones and re-pair following the above steps.
Once you have paired the headphones with a de-
vice, the headphones will remember this device
and will pair automatically when the device´s
Bluetooth is activated and within range. You do
not need to re-pair any previously connected de-
vices.
USING HEADPHONES WITHOUT BLUETOOTH
Your headphones have a built in Audio input which will
allow you to listen to music from non-Bluetooth devic-
es using a 3,5 mm Audio cable.
1. Insert one end of the Audio cable into the head-
phones Audio input.
2. Insert the other end into your device´s headphones
jack.
3. Begin playing music.
a.