IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Before wiring to power
supply and during servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping
must be performed by qualified service personnel. Product must be grounded to avoid potential electric shock
or other potential hazard. Product must be at locations and at heights and in a manner consistent with its
intended use, and in compliance with Electrical Code and local codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
150/220/280W Standard Bracket
Step 1
Secure floodlight bracket to the ground with mounting hardware that is sufficient to support weight of LED fixture and power box.
METEOR LIGHTING
*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Secure floodlight bracket to the ground with mounting hardware that is sufficient to support weight of LED fixture and power box. METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com INH05B02-18 V1.0 | Page 1 of 3 *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 2
Dimming cable METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com INH05B02-18 V1.0 | Page 2 of 3 *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Page 3
LED FIXTURE METEOR LIGHTING P: 213.255.2060 F: 213.596.3704 www.meteor-lighting.com INH05B02-18 V1.0 | Page 3 of 3 *METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
Need help?
Do you have a question about the Bolt Series and is the answer not in the manual?
Questions and answers