Klarstein Survivor 35 Manual page 23

Steps for changing the light inside
• Steps for changing the light inside unplug the power cord and open cover of the
fridge. Pry the light cover by using screwdriver, dismantle the light fixing board take
out the light component and disconnect con- nector wire.
• Change the faulty light and pull out the light components.
• Insert connector wire and fix the light fixing board.
• Fix light cover.
Defrosting
• Water vapour may frost on freezer's inwall. This will reduce the freezer's
refrigerating capacity. It is necessary to defrost in time.
• Defrosting steps are as below:
• Take the stored material from the freezer.
• If it is necessary, the stored-material could be stored in another freezer.
• Cut off the power, open the freezer's door(or lid), keep it open until the ice and frost
melt away.
• Use clean cloth to wipe the frost water.
Note: Never use stiff or sharp tools for deicing or prizing up the frozen material.
EN
23