Table of Contents
Advertisement
Quick Links
User's manual
Customer Service
US: 1-800-645-2986
Portable Dehumidifier - Energy Efficient
Model 246105
30 Pint Dehumidi er
Model 246106
50 Pint Dehumidi er
Model 246107
70 Pint Dehumidi er
Model 246108
70 Pint Dehumidi er
w/ Built-In Pump
WARNING
• DO NOT allow children or non-quali ed persons operate this dehumidi er.
• Disconnect unit from its power source before cleaning, maintenance, servicing or replacing parts.
• Disconnect all supply circuits before obtaining access to terminals.
• NEVER attempt to plug in or operate dehumidi er with defective or damaged wires, power cord,
or power cord plug. All defective parts should be replaced immediately by a quali ed service
technician using genuine replacement parts.
• Check the nameplate for the type of refrigerant gas used in the appliance. Maintenance and
disposal operations must be carried out by quali ed personnel only.
• This hermetically sealed system contains uorinated Greenhouse gases covered by Kyoto Protocol.
• DO NOT pierce the cooling circuit of the machine.
• DO NOT use this unit for functions other than those described in this manual.
• Ensure power plug is rmly and completely plugged into the outlet. Doing so will avoid risk of
electric shock or re.
• DO NOT plug other appliances into the same outlet. Doing so may result in the risk of electric shock.
• DO NOT disassemble or modify the appliance or any of its parts. Doing so may result in the risk of
electric shock or re. All services should be referred to a quali ed technician.
• DO NOT place the power cord or dehumidi er near a heater, radiator, or other heat source. Doing so
may result in the risk of electric shock or re.
Manual del usuario
Servicio de atención al Cliente
US: 1-800-645-2986
1
globalindustrial.ca
Manuel de l'utilisateur
Service à la clientèle
Canada: 888-645-2986
WARNING
Please read entire manual
carefully before use. Save
manual for future reference.
If there are any questions,
contact Global Industrial
Customer Service at
1-800-645-2986 or visit
www.globalindustrial.com.
Advertisement
Table of Contents
Related Manuals for Global 246105
Summary of Contents for Global 246105
- Page 1 Servicio de atención al Cliente Service à la clientèle US: 1-800-645-2986 Canada: 888-645-2986 US: 1-800-645-2986 Portable Dehumidifier - Energy Efficient Model 246105 30 Pint Dehumidi er WARNING Model 246106 50 Pint Dehumidi er Please read entire manual carefully before use. Save manual for future reference.
- Page 2 • If the appliance is making unusual sounds or is emitting smoke or an unusual odor, unplug it immediately. • DO NOT clean the unit with water. Water can enter the unit and damage the insulation, creating a shock hazard. If water enters the unit, unplug it immediately and contact Global Industrial Customer Service at 1-800-645-2986.
-
Page 3: Electrical Connections
• The mains socket is adequately earthed. Failure to follow these important safety instructions may result in injury or damage and absolves Global Industrial of all liability. Important information for correct disposal of the product in accordance with EC Directive 2012/19/EU: At the end of its working life, the product must not be disposed of as urban waste. - Page 4 Make sure the plate of the casters is ush against the bottom of the unit. Plate on Caster The above gure is for models 246105, 246106 & 246107 (without pump) The above gure is for model 246108 (with pump) Clean Filter Symbol Timer "On" Symbol On/Off...
- Page 5 On/O power supply, used to control the start-up or shut down of the dehumidi er. Increase and decrease the indoor humidity level, or set the time. • Humidity adjustable range is 35%RH-80%RH. The screen will display the setting humidity, and after few seconds, turn to display the ambient humidity. •...
-
Page 6: Continuous Drain
Continuous Drain • Connect the drain pipe on the back of the dehumidi er, then the unit can continuously run without the use of the bucket. 1) Put the dehumidi er on a level oor, unscrew the cap on the back of the unit. 2) Install the drain and gasket connector. -
Page 7: Cleaning And Maintenance
• Inspect dehumidi er for signs of damage. • Inspect power cable and plug for signs of damage. • Follow the installation instructions precisely. • Please contact Global Industrial Customer Service at 1-800-645-2986 for questions and inquiries. Troubleshooting: Problem Possible Cause Solution Make sure the dehumidifier's plug is pushed... - Page 8 If any of the following error codes appear, contact a certi ed after-sales service department for inspection and/or repair. For additional information, contact Global Industrial Customer Service at 1-800-645-2986. • Code “P1” applies to model 246108 (with pump) only.