INTROdUCTION Dear Customer, thank you for choosing our product. We feel certain you will appreciate its quality and reliability as it was designed and manufactured with customer satisfaction in mind.These instructions for use comply with the European Standard EN 82079. IMpORTANT INSTRUCTIONS.
Page 4
was designed, namely as a heatpad for home use. Any other use is considered not compliant with the intended use and therefore dangerous. • Before connecting the appliance to the mains supply, make sure that the voltage and frequency indicated on the technical data of the appliance correspond to those of the mains supply.
cleaning or performing maintenance and when the appliance is not in use. • Examine the appliance frequently for signs of wear or damage. lf there are such signs, or the appliance has been misused or does not work, contact our authorised technical service centre before switching it on again.
dESCRIpTION OF THE HEATpAd CONTROL Refer to the illustrative drawing at the beginning of this instructions booklet to verify your appliance equipment. 1 - Temperature display. 3 - Temperature selector. 5 - Control socket 2 - Stand-by display. 4 - ON/OFF selector. 6 - Plug USING THE HEATpAd WARNING! dO NOT use this appliance if there are visible...
CLEANING ANd MAINTENANCE The heatpad is washable. The washing symbols are also on the heatpad care label. WARNING! Always disconnect the appliance from the mains supply before cleaning or performing maintenance. WASHING INSTRUCTIONS Always disconnect the control from the heatpad before washing. MACHINE WASHING • The heatpad can be machine washed at 30°C with a normal cycle.
electronic equipment. Alternatively, instead of handling the disposal, the appliance can be handed over to the retailer when a new, equivalent appliance is purchased. Retailers of electronic products having a sales area of at least 400 m can also be handed electronic products that are to be disposed of measuring less than 25 cm, free of charge and with no obligation to buy.
Need help?
Do you have a question about the E0801 and is the answer not in the manual?
Questions and answers
Why the switch flashing constantly blue
The Dreamland E0801 switch flashes blue to indicate that the heatpad has automatically shut off after a 3-hour heat treatment.
This answer is automatically generated