Wireless
Security
Solutions
RE927S-03-00 3G GSM Communicator with Z-wave
Features
Connects panels to GSM Network
•
Compatible with:
•
GE Simon XT
o
GE Simon XT
o
Enables:
•
Alarm Reporting
o
Interactive Control Functions
o
Ethernet data reliability
o
Z-Wave Communicator included
o
Key Instructions
The same unit works for GE Simon XT & GE Simon XTi.
•
The RE927S mounts inside the GE Simon XT panel and communicates with
•
the GE Simon XT and GE Simon XTi via the Expansion Connector.
The antenna should be mounted in a location that will optimize cellular
•
signal strength. Mount as high in the building as possible. Mount the
Antenna as far as possible from large metal objects and sources of
interference.
Operation
Event Reporting:
Events are reported to both the CMS monitoring receiver and the Securenet
interactive server. The following events are reported by default:
Alarms
Alarm cancels
Openings
Closings
System Low Battery
System Low Battery Restoral
AC Power Fail
AC Power Restoral
Interactive Control:
The system may be controlled remotely through the Securenet interactive
platform.
Z-Wave
Z-Wave devices can be controlled via the Interactive function.
Siren (RE116-C)
Can be used with a Simon XT
Future: Simon XTi
Revert to Factory Default Button
Press and hold for 5 seconds: Resets the board and keeps all settings
Press and hold for 10 seconds: Reverts board back to the factory default settings
RE927S_3G GSM Communicator
Page 1 of 6
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
GSM
Card
Status LEDs
Ethernet LEDs
Power
(Green)
GSM
(Red)
CS
(Red)
Platform
(Amber)
16-May-14
Picture
Z-Wave
Module
Z-Wave
Antenna
LEDs
Indication
ON and flashing once per second when the board is powered and
running
ON when the unit is registered with the local GSM network
ON when the connection to the CMS central station is established
On when the connection to the Panel, and connection to the
SiteControl interactive server is established
RE927S_3G GSM Communicator
Page 2 of 6
24-Hour Tech Support Line: (715)808-0164
www.ResolutionProducts.com
GSM
Antenna
Connector
Revert to
Factory
Default Button
16-May-14
Need help?
Do you have a question about the RE927S-03-00 and is the answer not in the manual?
Questions and answers