1. Manuals
  2. Brands
  3. OTC Tools Manuals
  4. Automobile Accessories
  5. 5752
  6. Operating instructions

OTC Tools 5752 Operating Instructions

Hide thumbs
1
2
3

Advertisement

Table of Contents

655 Eisenhower Drive
Owatonna, MN 55060 USA
Phone: (507) 455-7000
Tech. Serv.: (800) 533-6127
Order Entry: (800) 533-6127
International Sales: (507) 455-7223
Fax: (507) 455-7063
Description: Tool reduces chance of injury when maneuvering steel or aluminum wheels for service.
CAUTION: To prevent personal injury and/ or property damage,
•
Study, understand, and follow all safety precautions and operating instructions before
using this wheel tipper. If the operator cannot read instructions, operating instructions
and safety precautions must be read and discussed in the operator's native language.
•
Wear eye protection that meets ANSI Z87.1 and OSHA standards.
•
Do not let go of the handle once the wheel has started to tilt.
•
Do not leave the wheel unattended in an upright position.
•
No alteration shall be made to this product.
•
Do not use this wheel tipper for anything other than its intended purpose.
•
Inspect the condition of the wheel tipper before each use; do not use if damaged, altered,
or in poor condition.
The safety signal word designates the degree or level of hazard seriousness.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
© Bosch Automotive Service Solutions LLC
Fax: (800) 955-8329
Fax: (800) 283-8665
Wheel Tipper / Loader
Application: Steel or Aluminum Wheels, inflated or uninflated

Safety Precautions

Explanation of Safety Signal Words

Form No. 571926
for:
Original Instructions
1 of 2
Sheet No.
Issue Date: Rev. A March 24, 2014
5752

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5752 and is the answer not in the manual?

Questions and answers

Related Manuals for OTC Tools 5752

Summary of Contents for OTC Tools 5752

  • Page 1: Safety Precautions

    655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Operating Instructions Fax: (800) 955-8329 for: 5752 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax: (507) 455-7063 Original Instructions Wheel Tipper / Loader Application: Steel or Aluminum Wheels, inflated or uninflated Description: Tool reduces chance of injury when maneuvering steel or aluminum wheels for service.

  • Page 2: Operating Instructions

    Operating Instructions Form No. 571926, Sheet 1 of 2, Back Operating Instructions Notch Notch Notch Hub Flange Against Floor (steel or aluminum wheel) 1. Hook the first notch of the wheel tipper in one of the Figure 1 wheel holes. Notches 2 and 3 on the wheel tipper should be facing toward you as shown in Figure 1. Note: Do not use the hole with the valve stem.
  • Page 3 Operating Instructions Form No. 571926 Loading Instructions 1. Follow the instructions to use the wheel tipper / loader to raise the wheel to an upright position. 2. Position the wheel one foot away from the tailgate or bed of the vehicle with the hub flange facing away from the vehicle. 3.

Table of Contents