Lievers Prefab Easy Screed Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

OPERATION MANUAL

PREFAB EASY SCREED

LIEVERS HOLLAND

Groot Mijdrechtstraat 68 – 3641 RW

P.O. Box 103 - 3640 AC

Mijdrecht (NL)

Tel.: 0031 – (0)297-231900 / Fax: 0031 – (0)297-231909

E-mail: info@lieversholland.nl / Internet: www.lieversholland.com

Table of Contents

Need help?

Do you have a question about the Prefab Easy Screed and is the answer not in the manual?

Questions and answers

Summary of Contents for Lievers Prefab Easy Screed

Page 1 OPERATION MANUAL PREFAB EASY SCREED LIEVERS HOLLAND Groot Mijdrechtstraat 68 – 3641 RW P.O. Box 103 - 3640 AC Mijdrecht (NL) Tel.: 0031 – (0)297-231900 / Fax: 0031 – (0)297-231909 E-mail: info@lieversholland.nl / Internet: www.lieversholland.com...
Page 2: Table Of Contents
Lievers Holland. Lievers Holland may not be held responsible for any guarantees or liabilities for the contents of this publication and points to, in this case, all implied securities for suitability of merchantability or any other purposes. Lievers Holland further retains the right to revise this publication and to alter the contents over certain periods of time, without the obligation to report such alterations and changes first.
Page 3: Preface
1. Preface This manual has been written to help you operate and maintain Prefab Easy Screed safely. This manual is intended for dealers and operators of Prefab Easy Screed and contains useful instructions for use, maintenance and repair. These instructions need to be respected and followed.
Page 4: Preface
Working Prefab Easy Screed is used with forms / rails. The profile has a dual purpose and can be used for form-to-form screeding or wet screeding. By rotating the power-unit 180 degrees the operator can choose which side of the blade he prefers.
Page 5: Technical Data
Comfort exposure =8,3 hr =8,3 hr =33 hr max. =33 hr max. Table 1: Technical data Prefab Easy Screed ** The weighted effective value of acceleration, determined according to ISO 5349 5/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 6: Safety
4.2 Safety precautions  The Lievers bullfloats have been developed and tested in accordance with the strict international safety standards.  Before operating these machines, make sure to have read this manual carefully. If you have any questions , do not hesitate to contact the supplier.
Page 7 The following safety-aspects specifically apply to those Lievers products which are equipped with an electrical drive unit:  Place the wires between the electrical source and the work place in such a way, that they cannot be damaged and your colleagues cannot trip over them.
Page 8: Use
5. Use This chapter describes the use of the Prefab Easy Screed OR THE LOCATION AND DESCRIPTION OF THE REFAB EASY SCREED PARTS WHICH ARE MENTIONED IN THE TEXT WE REFER TO FIGURE ON PAGE 5.1. Assembling When delivered the screed is not ready-for-use. The drive unit and the handles need to be mounted. Required material: 2 x socket wrench.
Page 9 7. Pull the plug of the feeder cable out of the wall socket. 8. Clean the machine with water and a brush. 9. After use, place the Prefab Easy Screed on a dry and stable surface. 9/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 10: Maintenance
6. Maintenance Although the Prefab Easy Screed only has a few moving parts, regular maintenance promotes a long and trouble-free life. WARNING: N EVER USE A HIGH PRESSURE WATER CLEANER TO CLEAN THIS MACHINE WITH AN ELECTRICAL DRIVE UNIT WARNING: C...
Page 11: Parts List
7. Parts list 11/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 12 12/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 13 13/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 14 14/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 15 15/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...
Page 16: Troubleshooting, Repairs
12 months). Table 2: Possible problems, causes and solutions. Tip: Please contact Lievers Holland if problems occur that are not mentioned in the list, or if a mentioned problem is not solved by the solutions in the list. Contact details Lievers Holland:...
Page 17: Dismantling, Disposal
The required quantity.  The dispatch address and dispatch mode. Tip: When ordering parts, fill in the order form accurately. Lievers Holland declines all responsibility for the supply of incorrect spares due to incomplete or unclear requests. 9. Dismantling, disposal National and local regulations concerning dismantling and disposal of materials need to be obeyed (separated disposal).
Page 18: Declaration Of Conformity
2) Complies with the following harmonised standards: NEN- EN 12100-1:2003, NEN- EN 12100-2:2003, NEN- EN 12649 Mijdrecht, June 29, 2016 Supplier: Bouwmachinefabriek Lievers B.V. Address: Groot Mijdrechtstraat 68, 3641 RW Mijdrecht Name: C.M. de Wit Position: Managing director 18/18 Operation Manual PREFAB EASY SCREED, revision 2: 29-6-2016...