Table of Contents
Advertisement
Quick Links
Assembly Instructions
Tribeca Twin over Twin Bunk Bed
7 9 , 8 "
We appreciate your choice in purchasing our furniture and strive to deliver
the highest quality. In the unlikely event that you note any damaged or
missing part please do not return to the store. Please reach out to us at
info@camaflexi.com
or by phone at
(347)844-9307
so that we can expedite
shipment of replacements.
Advertisement
Table of Contents
Summary of Contents for ECOFLEX T1203
- Page 1 Assembly Instructions Tribeca Twin over Twin Bunk Bed 7 9 , 8 " We appreciate your choice in purchasing our furniture and strive to deliver the highest quality. In the unlikely event that you note any damaged or missing part please do not return to the store. Please reach out to us at info@camaflexi.com or by phone at (347)844-9307...
- Page 2 Please read the following before attempting assembly -Your new piece of furniture requires easy assembly. Below are some suggestions to make it easier, minimize time and save you un-needed grief. -Do not dispose of any packing material until assembly is complete. -Be sure you assemble the item on a soft surface such as cardboard or a blanket to protect the quality finish from scratches or indentation.
- Page 3 Ecoflex Furniture LLC. 1031 E.Mountain Street-Bldg.306 Kernerville,NC 27248 United States Model: T1203...
- Page 4 IMPORTANT INFORMATION READ BEFORE ASSEMBLING THIS PRODUCT Follow the information on the warning labels found on the bunk bed and on the packaging. Do not remove the warning label from the bed. Use only a mattress with the dimensions 74-75 in. L x 37.5-38.5 in. W x 8 in. H on the upper bunk.
- Page 5 Parts List...
- Page 6 Hardware List 7.0 x 50 Wood joint connector 7.0 x 100 Wood joint connector Flat head wood screw 3,5 x 35 Hole Plugs 08mm Wood dowel 15 x 70 Wood dowel 10 x 45 Hex key Hole Plugs 07mm 10mm Hole Plugs...
- Page 7 Assembly Options Twin over Twin Bunk Bed Conversion into Two Single Twin Beds...
- Page 8 Insert wood dowels (7) into slats (E,F,G). (2 ) (2 ) Insert wood dowels (7) into guardrails (H,I,J,K). Attach legs (A,B) to slats (E,F,G) using wood joint connectors (3). Attach legs (A,B) to slats (E,F,G) using wood joint connectors (3). Only two wood joint connectors (3) will be used at each leg.
- Page 9 Attach first set of legs (C,D) to slats (E,F,G) using wood joint connectors (3). Attach second set of legs (C,D) to slats (E,F,G) using wood joint connectors (3). Insert wood dowels (6) into both sets of legs (E,D). Insert barrel nuts (8) into crossbeams (H,I). Attach crossbeams (H,I) to first set of legs (C,D) using joint connectors (1).
- Page 10 Secure mattress supports (L) to the bed assembly from the previous step using flat head wood screws (4). Use spacers (R) as guides to space mattress supports (L) evenly. Insert barrel nuts (8) into crossbeams (H,I). Attach crossbeams (H,I) to legs (A,B) using joint connectors (1). Joint connectors (1) will screw into barrel nuts (8).
- Page 11 Secure mattress supports (L) to the bed assembly from the previous step using flat head wood screws (4). Use spacers (R) as guides to space mattress supports (L) evenly. Attach guardrails (K) to leg (A) using wood joint connectors (3). Attach first guardrail support (M) to crossbeam (H) and guardrails (J) using flat head wood screws (4).
- Page 12 Carefully lift and place the upper bunk assembly onto the lower bunk assembly using wood dowels (6) as guides. Step 14 OPTION A POWER LADDER MONTED RINGHT SIDE OPTION B LADDER POWER RIDE THE LEFT SIDE...
- Page 13 Assembly Options Twin over Twin Bunk Bed Conversion into Two Single Twin Beds Carefully lift the upper bunk off of the lower bunk.
- Page 14 Loosen the appropriate hardware of the upper bunk so that the guardrails and leg assemblies are no longer connected to the bed assembly. Insert barrel nuts (8) into either end of crossbeams (H,I). Attach legs (A,B) and legs (A,B) to crossbeams (H,I) using joint connectors (1).