SC iKonn 220 User Manual page 58

56
Settings in TCR Mode (M1, M2, M3)
1� Press the Fire button and the Up button simultaneously for a few seconds while the device is switched off to
enter the TCR menu�
2� Press the Fire button to switch between TCR M1, M2, and M3�
3� Press the "Up" or "Down" buttons to change the values corresponding to the coil of-the atomizer head used�
4� Hold down the Fire button or wait 10 seconds to confirm the settings�
TCR Value Ranges for different Coils
Material
Nickel
NiFe
Titan
SS (303, 304, 316, 317)
Note:
1� The TCR values listed in the table are the actual TCR value multiplied by 10
2� The TCR value range is 1 to 1000�
SC iKonn 220 - Selection & Operating of the Modes
TCR Value Range
600 – 700
300 – 400
300 – 400
80 – 200
�
5